Sample Preparation Equipment for Soil Elemental Analysis

Min.Order: 1
Product origin: Chengdu, Sichuan, China
Infringement complaint: complaintComplaint
US$ 30000 ~ 35000

Description
Guiheng XRF high frequency fusion machine
1. Equipment name: manual high-frequency fusion machine
2. Model: GH-2SC
3. Casting mode: manual casting
4. Equipment composition and characteristics
XRF high frequency fusion machine is composed of heating system, control system, mechanical system and water cooling system.
The heating system uses the high frequency power supply made by our company to form eddy current on the platinum crucible, so that the platinum crucible induction heating;
The control system adopts touch screen display and input data, programmable logic controller (PLC) control, can store at least 10 kinds of samples, users only need to set according to the sample melting requirements: current and time (oxidation - temperature - constant temperature - rotation - molding) a few steps, and then gently press the start (screen built-in key) to complete a sample preparation process. If the X fluoroscope makes a curve according to this program, the curve program can be stored for calling.
The mechanical system adopts the self-developed "centrifugal variable speed mixing plus positive and negative rotation system" -- Patent No. : ZL 2010 2 0155249.7, to achieve constant changes in the mixing process, so that the sample and flux are fully mixed.
The water cooling system is composed of water pump, water tank and exhaust fan. The inlet temperature range of the cooling water system is 5-45ºC. Inlet pressure range: 0.1M Pa -- 0.3MPa, through circulating water cooling, to ensure that the electrical components in the equipment work normally;
Equipment characteristics
1) Easy to use: start up without preheating or heat preservation, 30 seconds from room temperature to more than 1000ºC, especially suitable for intermittent sample preparation.
2) Rapid sample preparation: Rapid sample preparation can be realized with fast heating speed. A batch of samples can be made in about 10 minutes, and continuous work can be done for 24 hours.
3) Safety and environmental protection: built-in exhaust fan to eliminate waste gas, no large area of thermal radiation is beneficial to the health of the operator.
4) Casting molding: reduce the crucible maintenance rate.
5) Low follow-up cost: no expensive consumables, no need to replace heating elements and refractory materials regularly.
6) Good energy saving effect: only heating crucible and mold.
7) Less platinum and gold consumption: with a small number of crucible and mold can achieve the same output of other heating equipment.
8) Equipment protection: with water shortage, over current, over voltage, over temperature fault protection functions.

FIG. 1 Picture of the appearance of the equipment
FIG. 2 Photos of equipment melting sample

5. Technical parameters
Unit type GH-2SC
Woek poweAC220V/50Hz
Maximum output 0-6KW (fused and molded power supply output power)
Range of oscillation frequencies 50KHz-80KHz
Range of current regulation 35A-130A
Time adjustment range0s-999s
Forming mode Hand cast molding
Sample production per batch 2
Sample preparation speed10 min/batch
Cooling water pressure0.1-0.3MPa
Program storageMore than 10 groups
Fusion temperature 0-1300ºC (adjustable)
Temperature control accuracy±1ºC
Stirring methodCentrifugal rotation + positive reversal (exclusive patent)
Rotational speed range ★0-180 rpm / min (adjustable)
Speed change period ★N. times / min (adjustable)
Infrared temperature measurement range400ºC-1200ºC
Main dimensions (length, width and height)1120×640×650mm
Host net weight 175kg
Tank shape size 800x540x980
Water tank net weight90kg

Note: "★" mark is the unique technical parameters of your company

Product Tag:
Related categories:
Scroll to Top