Complaint
Jusu Carbon's RP Graphite Electrode
RP300*1500/1800mm Specifications & Allowance of Graphite Electrode
| Item | Unit | Electrode | Nipple |
| Specific Resistance ≤ | µΩ·m | 8.0 | 5.8 |
| Flexural Strength ≥ | Mpa | 8.4 | 16.0 |
| Elastic Modulus ≤ | Gpa | 8.0 | 12.0 |
| Bulk Density ≥ | g/cm³ | 1.60 | 1.75 |
| CTE(R.T. ≤600ºC) ≤ | 10-6/ºC | 2.8 | 2.7 |
| Ash ≤ | % | 0.2 | 0.2 |
Standard Sizes & Packing Quantity
| Nominal Dia(mm) | Actual Dia(mm) | Nominal Length(mm) | Weight(kgs) | Quantity(pcs) | ||||
| mm | Inch | Max | Min | mm | Inch | Net | Gross | 20'Container |
| 300 | 12 | 308 | 303 | 1500±100 | 60 | 193 | 198 | 100 |
| 300 | 12 | 308 | 303 | 1800±100 | 72 | 232 | 237 | 84 |
Applications of Graphite Electrode
1)Used in steel arc furnace, refining furnace, as a conductive electrode.
2)Used in industrial silicon furnace, yellow phosphorus furnace, corundum furnace, as a conductive electrode.
Company Profile & Factory's Sophisticated Equipment
Jinan Jusu New Material Technology Co., Ltd. (hereinafter referred to as Jusu Carbon) is a foreign trade export enterprise jointly established by Jilin Carbon Co., Ltd and China Carbon Energy Co., Ltd. The company was registered in Jinan, Shandong Province in 2022, mainly engaged in the export sales of calcined petroleum coke and graphite electrodes.
The company's high quality calcined petroleum coke and famous brand Jilin carbon graphite electrode. Serving domestic and foreign large steel mill customers and aluminum customers. Main exports to the Middle East, South Africa, Brazil, Russia, Europe and other more than 40 countries and regions, annual sales have reached hundreds of millions of dollars.
At present, the products are used by more than 60 enterprises at home and abroad, and the product performance has reached the international advanced first-class quality. At present, we are expanding the output of products, and strive to build the giant plastic carbon as soon as possible into a "domestic first-class, world famous" international large-scale enterprise. Warmly welcome the major partners and dealers to negotiate cooperation.
Graphite Electrode Process Flow
Sophisticated Equipment
1)Divided packing
The electrodes and nipples are packaged separately and shipped.
2)Pre-connected packing
The nipples have been pre- installed with electrode one end,and packaged shipment.
The main purpose of packing: To protect the electrode from damaging during the storage and transportation, especially of the screw parts.
Note: We can provide packaging according to the requirements of users.
Jusu Carbon has an experienced and highly skilled service team, which always insists on the service concept of "honest service and perfection", continuously deepening marketing services, extending service contents for the whole process of pre-sales, in-sales, and after-sales throughout the entire marketing process, which provides the customer with technical positioning, guidance, and full tracking service of steel making testing.
Names and Description of the graphite electrode body
Notes on the use of graphite electrode
1. When loading the charge into the electric furnace, in order to reduce the impact on the electrode when the charge collapses, the big bulk material should be placed near the central bottom of the electric furnace, and at the same time, be careful not to use a large amount of non-conductive objects such as lime to accumulate directly under the electrode, which affecting the power supplying or breaking the electrode.
2. Should pay attention to the position of the furnace cover. If the furnace cover deviates the electrode rubs against the furnace cover, it will result in electrode damage and scraping when the electrode rises or falls.
3. When connecting the electrodes, first blow the dust in the nipple hole with compressed air, then align it with the center, and slowly screw it in vertically. The force used when screwing the nipple into the electrode hole should be smooth and average and the tightening torque should comply with the regulations. Refer to Fig.1 and Fig.2. Before the ends of the two electrodes are in connected, blow off the dust again with compressed air and then tighten.
4. During the electrode connection, the upper and lower branch electrodes should be kept vertical, and the upper branch electrode is aligned with the center line and slowly screwed into to prevent the damage to the thread and affect the connection effect.
5. When connecting the electrode, if it is found that the nipple bolt is detached, the joint bolt should be replaced and then connected.
6. After the electrode is connected, if it is found that there is a gap, it is necessary to find out the reasons so that can be used after eliminating the connection gap.
7. When holding the electrode, the holder must avoid the joint area and do not hold the electrode within the cordon line. See Fig.3.
8. The electrode should be used vertically to avoid tilting operation.
9. The electrode should not be used as carbon adding material to prevent from deterioration of electrode performance.
10. Due to the different raw materials and manufacturing processes used by different manufacturers, the physical and chemical properties of the electrodes and nipples are different. Therefore, generally it is not allowed to use different manufacturers' nipples and electrodes in series.
11. The furnace cover should be well sealed to reduce the amount of air entering. The combustion-supporting nozzle and oxygen should be properly used to reduce the oxidation consumption at high temperatures.
12. For electric furnaces with large vibration, the method of applying the pins can also be adopted to prevent threads loosening and releasing.
13. The electrode and nipple end threads are of three threads per inch and four threads per inch. Pay attention to the type of threads ends of the life spreader when using. The number of threaded type of the nipples and electrodes end types should match each other.
The Analysis of Graphite Electrode Accident
Accident analysis of graphite electrode breaking, falling off and dropping blockhappen, which is an accident phenomenon, as shown in Fig.4. There are multiple reasons for abnormal consumption, some of which are caused by the electrode quality and some are caused by improper use by the customer. The main causal analysis of the accident is shown as Fig.5. In the event of such accidents, please contact our marketing department on time. We shall work with each other to find the reasons and
eliminate the accidents.
If you have any inquiry about the quotation or cooperation, please feel free to email us or use the following inquiry form. Our sales representative will contact you within 24 hours.
Thank you for your interest in our products.
