Colored Raw Plastic Granules Pai

Min.Order: 10,000

Product origin: Xingtai, Hebei, China

Infringement complaint:

Complaint

US$ 15 ~ 45

Description

1.Product Introduction:

PAI is a family of soluble polyamide-imides sold in pellets form. The polymer is tough, chemically resistant, and thermally stable. It has thermal capability similar to many polyimides, at a lower price. Coatings based on AI polymers have been shown to be cost-effective in electrical/electronic, high-temperature decorative, and corrosion prevention applications.
PAI is available in water-soluble versions that possess exceptional mechanical, thermal, chemical resistance as well as wear-resistant properties.
Torlon resins are inherently non-flammable, have outstanding electrical properties, and possess enormous temperature stability from cryogenic to 300°C and some grades are FDA compliant.

2.Datasheet

Physical	Measurement	Value	Testing Method
Density/Specific Gravity @ 73°F	lb/in³	0.0509	ASTM D792
Water Absorption Immersion, 24 Hours	% by wt.	0.4	ASTM D570 (2)
Water Absorption Immersion, Saturation	% by wt.	1.7	ASTM D570 (2)

Mechanical	Measurement	Value	Testing Method
Coefficient of Friction (Dry vs. Steel) Dynamic	-	0.35	QTM 55007
Compressive Modulus of Elasticity, 73°F	ksi	478	ASTM D695
Compressive Strength, 10% Deformation, 73°F	psi	24000	ASTM D695
Tensile Elongation at Break, 73°F	%	10	-
Flexural Modulus of Elasticity, 73°F	ksi	600	ASTM D790
Flexural Strength, 73°F	psi	24000	ASTM D790
Izod Impact (notched), 73°F	ft-lb/in	2	ASTM D256 Type "A"
Wear Factor "k" x 10^-10	in³-min/ft-lb-hr)	>= 1000	QTM 55010
Limiting PV (with 4:1 safety factor applied)	psi-ft/min	4000	QTM 55007
Tensile Modulus of Elasticity, 73°F	ksi	600	ASTM D638
Hardness, Rockwell E, 73°F	-	80	ASTM D785
Hardness, Rockwell M, 73°F	-	120	ASTM D785
Shear Strength, 73°F	psi	16000	ASTM D732
Tensile Strength, 73°F	psi	20000	ASTM D638

(1)Property values for individual batches will vary within specification limits. Values shown are typical for uncolored resin; colorants may alter values.
(2)Measured at 25°C
(3)Measured at 40°C

Pigments & Additives

Pigments and additives can be used in conjunction with coating resins to produce special purpose coating and adhesive formulations. Suitable additives of this type include heat-stable organic and inorganic pigments, fillers, and certain epoxy and fluoropolymer copolymers. Due to the inherent color of coating resins, care must be taken if white or very pale shades are to be successfully formulated.
To prevent the absorption of unwanted moisture, all pigments should be ground in closed milling equipment. Likewise, hydroscopic additives, such as fibers, copolymers, etc, should be dried to appropriate moisture levels prior to being incorporated into the formulation.

Processing

PAI-based coatings can be effectively applied by spray, roll, spin, or curtain techniques. Usually dry film thicknesses from 10-20 µm are readily achieved in a single coating pass. Greater film thicknesses can be achieved by applying multiple coats.
Regardless of the method employed, it is essential to assure appropriate preparation of the substrate prior to application of coating. Once complete, application equipment should be purged of coating and cleaned with a true solvent.

To better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.

Hebei Haoru Import and Export Trading Co., Ltd. is located in Xingtai City, Hebei Province. This company is a large modern company. The main business scope is the export of plastic particles and office supplies. In recent years, the company adhering to the concept of customer development, adhere to development, accelerate industrial transformation and upgrading, vigorously implement the technology innovation strategy, put forward a series of industry-leading technology innovation. After years of efforts and development, it has a certain scale and strength. Now has a technical service team, with excellent quality, professional service, safe technical services to provide users with higher strength, better products and services. Thanks to the high quality of our products and reasonable export prices, this will lay the foundation for our strong technical capabilities and market presence in the Americas, Africa and the Middle East, mainly in continental Europe.

Q1. What is your terms of payment?
A: T/T, details could be discussed.
A: FOB, CFR, CIF, DDU, EXW, etc.

Q2. How about your delivery time?
A: Generally, 3 to 12 days upon advance payment.
The specific delivery time depends on your detailed requirements and the quantity of your order.

Q3. Can you produce according to the samples?
A: Yes, we can offer samples or technical drawings.

Q4. What is your sample policy?
A: We could offer the sample for free charge but your esteemed company will pay the cost of freight.

Q5. Do you test all your goods before delivery?
A: Yes, we have 100% inner inspection in our own laboratory and plant before delivery.

Q6: How do you make our business long-term and good relationship?
A: 1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them.