An explosion proof high bay or low bay light is an industrial-grade light fixture designed for use in hazardous locations where atmospheres may be exposed to the release of flammable gases or vapors, combustible dusts or ignitable fibers or flyings in explosive concentrations.
Typical hazardous environments form in high bay and low bay facilities such as oil and gas processing facilities, petroleum refineries, chemical plants, solvent tion and fireworks manufacturing and storage facilities, flour silos, grain processing and storage terminals, coal prepaextraction plants, powdering and lacquering facilities, saw mills and wood-processing facilities, pulp and paper mills, ammuniration and processing plants, aircraft hangers and fuel servicing areas, pulverized sugar and cocoa packaging and handling plants, and confectionary manufacturing plants.
Model | MXEL 8230 | Color Rendering Index | ≥70RA |
Rated power | 10-50W | LED Qty | 60pcs |
Rated voltage | AC220V 50Hz | Base Specifications | CREE3030 |
Frequency | 50Hz | LED'S Operating Life | 100000 Hours |
Light Efficiency: | 120lm/w | Start-up time | ≤0.2 s |
Power Factor: | >0.95 | Explosion-proof mark | ExdIICT6 |
Operating Temperature | -20~40ºC | Anti-corrosion grade | WF2 |
Storage Temperature | -20~40ºC | Inlet thread | DN20 |
Protection Level | IP66 | Cable length | ≥50cm |
Lighting Angle | 120 | Weight | 2.5kg |
Correlate Color Temperature | 3000-6500K | Size | Φ198×152mm |
Item | Describe | Quantity | |||
Liner Size | 20*20*25CM (9183 high glass inner box) | 8 | |||
Lining size | 18*18*3.5CM inner hole diameter φ=13cm (8230 short glass inner support) | 8 | |||
Outer carton size | 42*42*52.5CM (9183 high plastic cover/811PC/811 high glass outer box) | 1 | |||
Packaging method | A box of eight |
Application areas
Working in potentially explosive areas require explosion proof lighting solutions. We have taken advantage of these multiple technology developments to design a new range of explosion proof LED work lights providing powerful illumination, extreme durability, versatile functionality, and very long lifetime.
The explosion proof work lights are approved and certified according to the latest European ATEX directive.
Caution
-Schematic diagram
1.Before installation, it is necessary to check whether the actual operating conditions are in conformity with the parameters listed on the lamp nameplate.
2.Before installation, please test the lighting according to the parameters of the lamp nameplate to ensure that there is no quality problem before installation.
3.Before installation, it is necessary to determine the installation location and mode of the lamps according to the installation mode provided by the product, in combination with the on-site use environment and lighting requirements, so as to ensure that the installation is firm and reliable.
4.Connect the prepared cables with the input cables of lamps and lanterns according to the corresponding fire (brown), zero (blue) and ground (yellow-green) wires, so as to ensure that the connection is firm, and make good insulation and waterproof measures at the connection.
5.The input end of the cable can be connected to the power supply of the corresponding voltage to illuminate.
-Using The Matters Needing Attention
1. When transporting, the lamp should be installed in the carton equipped with foam shock absorption.
2. When using, the surface of the lamp has a certain temperature rise, which is a normal phenomenon.
3. The power supply voltage can work normally in the rated voltage. If the power supply voltage is too high, the lamp will be damaged; if the voltage is too low, the lamp will not start normally.
4. The luminaire must be reliably grounded.
-Quality Assurance
The company has passed ISO9001:2008 international quality system audit certification, this product strictly implements ISO9001 international quality management system standard production, to ensure that the product quality fully meets national standards and design requirements.
Explosion Proof Exit Light EX proof Emergency Light Explosion-Proof High Bay Light
1.Why is Explosion Proof Lighting necessary in your area?
Plenty of commercial facilities have areas where lighting fixtures can come into contact with hazardous materials. These can be flammable, combustible, or ignitable materials, gases, or vapors. These areas can be at risk of fire or even explosion if the lighting fixtures can't withstand the abnormal conditions.
2.What is hazardous location lighting?
Hazardous location lighting refers to fixtures that you can safely use in an area where it's likely that fire might start. According to the National Electrical Code, hazardous locations are those areas "where fire or explosion hazards may exist due to flammable gases or vapors, flammable liquids, combustible dust, or ignitable fibers or flyings."
3.What is explosion-proof light fixture?
Explosion proof lighting refers to lighting fixtures that are able to contain sparks that could potentially the flammable and explosive gases in the atmosphere. Therefore, explosion proof lighting does not refer to lighting equipment that are resistant to explosions but rather, the capacity to prevent external explosions from occurring in a hazardous location.
Finding suitable lighting for the work site that won't falter under extreme circumstances is what makes it most reliable in any situation. Lamp suite explosion proof lighting is 100% certified with non-spark, durable, and thick materials, along with all necessary features to maintain a high level of safety at all times.
So, what makes Lamp suite different?
Our expertise in solar and technical lighting solutions allows us to give you the appropriate explosion proof lighting to suit you and your business's needs the best. As a result, you can expect outstanding LED performance, lower costs, increased productivity, and safety adherence to give you and your workers total peace of mind.
Lamp suite has a passionate team aiming to help you create a safe working or public environment where workers, pedestrians, shoppers, or anyone nearby can feel comfortable moving around.