Complaint
Wheel Alignment/Garage Equipment/wheel alignment machine price/Automotive Equipment/automotive aligner
XP-A10
Characteristics of 3D Wheel Alignment
1. 3D cameras alignment-Based on the car and not influenced by the platform
2. Measurement system-equipped with double digital cameras and four target disk, supplying revolutionary measurement mode
3. Target disk-There is no electronic components and connection lines on the target disk, so the wheel alignment will not has a component failure problem.
4. Equipment Calibration - once calibration before delivery, workable immediately after installation, no need for periodic calibration.
5. Measurement progress-no need to compensate for steel ring , the precise eccentric compensation will be just once pulling or pushing the car back and forth
6. Software system--Easy to operate, complete conventional basic parameters including two minutes ,significantly faster than conventional aligners
7. Daily Maintenance-Easily maintenance and download freely upgrade for the model data
| Measurement project | Accuracy | Measurement range |
| Display accuracy | 1´/1mm | |
| Camber | ±2´ | ±10° |
| Caster | ±6´ | ±20° |
| Kingpin Inclination | ±6´ | ±20° |
| Toe-in & Toe-out | ±2´ | ±20° |
| Set back | ±2´ | ±5° |
| Thrust angle | ±2´ | ±5° |
| Wheel Deviation | ±2mm | 4000mm |
| Axis Deviation | ±2mm | 4000mm |
3D measurement technology
Based on the car body measurement technology more accurate, more stable.
Target panel
No electronic components replacing the traditional electronic sensor, eliminate the circuit may cause equipment failure.
Camera measurement system
Two cameras combined with four target disks creating a revolutionary measurement method
Software system
Easy to operate, basic four-wheel positioning data can be read in two minutes.
Measurement process
The body as a benchmark not affected by the level of the lifting platform
Equipment calibration
Only one RCP calibration is required after the equipment is installed, the process is simple and there is no need to repeat this work regularly
No rims compensation no lifting of the body
The V3D1 3d imaging technology is different from the traditional CCD four-wheel positioning technology without a horizontal test reference plane can be quickly and accurately four-wheel positioning.
Patented "V.O.D.L." operating function tips
In the process of four-wheel positioning, the operator does not need to look at the computer screen. Under the guidance of the "V.O.D.I." system the four-wheel positioning operation can be successfully completed
No wiring harness.no battery no electronic sensor first electronic components
The target plate is made of collision and corrosion resistant material. Easy to maintain and durable.
The wheel clamp
Quick mounting.suitable for direct 11" to 25" rim
"Dynamic" 3D 3D imaging measurement technology
No delay.instant completion - 3D imaging dynamic measurement technology allows the operator to dynamically adjust the parameters of the four-wheel positioning.
3D animation adjustment guide
Provide instructions on specific methods of vehicle adjustment.including notes on parts and tools required for adjustment
The customer guide
Menu options have functional instructions.clear identification and color prompts to avoid user misoperations.
Kingpin back Angle kingpin inside Angle diagnosis
All the parameters reflect the real state of the suspension system in real time.helping the operator to better judge the condition of the vehicle and adjust the four-wheel positioning
Yantai Lift Equipment Co., Ltd. is a joint-stock enterprise specializing in the production and sales of wheel alignment, car lift, tire changer, wheel balancer and other garage equipment.
The company has four major production bases: Wheel alignment, car lift, tire changer and wheel balancer. The company always adheres to independent research and development and independent production. Advanced intelligent equipment and scientific management mode provide its excellent quality assure.
Wheel alignments include car wheel alignments, truck wheel alignments, and car lifts include scissor car lifts, single-post car lifts, two-post car lifts, four-post car lifts, and motorcycle lifts.
Our products have been exported to Australia, Thailand, Malaysia, Indonesia, France, Spain, Turkey, Jordan, Mexico and other countries.
Our products: The perfect combination of high quality and high cost performance.
Our mission: High-quality products serve the automotive aftermarket in China and the world.
We are becoming a modern and competitive company, a leader in the field of automotive service equipment.
Trade Terms | FOB / CFR |
MOQ | 3UNITS (USD200.00 extrally charged for LCL shipment to cover the inland freight + custom declaration fee) |
Port | QINGDAO |
Shipment | BY SEA /AIR |
Payment Terms | T/T |
Payment condition | 30% prepayment,balanced againt BL copy&L/C at sight. |
Supply Capability | 1000units/month |
Sample Availability | Yes ,But all freight(Inland freight +seafreight) covered by buyer |
Sample Time | 5-10days(depends on whether have in stock) |
Lead Time | 25-30days(Rush season 5-10days longer) |
Packing | Metal frame&Carton |
Delivery time | 30-45days shipping time (depends on destination position) |
Service | 1% free parts;1year warranty after port of destination |
1. Why should I choose our product?
There are several reasons you should strongly consider purchasing our product:
*Top raw materials from only the finest plants
*Only professional cost-effective equipment
*Low prices with high quality revenue producing products
*Increase productivity for your customers( Your customers gain more, they will enjoy buying from you.)
*The best customer service. Quick reply within 24 hours and more.
*Great Warranty
2. How safe are your product?
Our product have been tested and CE certified for safety. They also meet the American and Australian Standard.
3. Should I keep repair and replacement parts in stock?
Yes, most all commonly required repair and replacement parts should always keep in stock.
4. Are your product designed for commercial use?
All of our product can be used in commercial applications without any problems.
5. Do you offer any custom designs?
Yes,we provide OEM/ODM services to top range partners. Produce a superior product for you by your designs.
