Complaint
0.20 inch Numeric Display_smd type
This is a 0.20 inch (5.08 mm) digit height single digit SMD display. This device uses AS-AlInGap and GaN LED chips (AlInGap epi on GaAs substrate). The display has gray face and white segments.
1. Features
0.20 inch (5.08 mm) DIGIT HEIGHT
CONTINUOUS UNIFORM SEGMENTS
LOW POWER REQUIREMENT
EXCELLENT CHARACTERS APPEARANCE
HIGH BRIGHTNESS & HIGH CONTRAST
WIDE VIEWING ANGLE
SOLID STATE RELIABILITY
CATEGORIZED FOR LUMINOUS INTENSITY.
LEAD-FREE PACKAGE(ACCORDING TO ROHS)
2. Outer Dumension and Internal Circuit Diagram:
Notes :
1. All dimensions are in millimeters. Tolerances are ±0.25 mm (0.01") unless otherwise noted
2. Foreign material on segment <=10mil
3. Ink contamination (surface) <=20mils
4. Bubble in segment <=10mil
5. Bending <= 1% of reflector length
6. Plastic pin's burr max is 0.1 mm
3. Pin connection
| Pin NO. | Connection | |
| LSD2011Ax | LSD2011Bx | |
| 1 | Anode E | Cathode E |
| 2 | Anode D | Cathode D |
| 3 | Common Cathode | Common Anode |
| 4 | Anode C | Cathode C |
| 5 | Anode DP | Cathode DP |
| 6 | Anode B | Cathode B |
| 7 | Anode A | Cathode A |
| 8 | Common Cathode | Common Anode |
| 9 | Anode F | Cathode F |
| 10 | Anode G | Cathode G |
| LITEKEY PN | PART NO. | Color | λd (nm) | Device | Description | Typ.Luminous Intensity Iv/Seg @IF=2mA(ucd) |
| LSD2011AR | LTS-2307CKD-P | Hyper Red | 639 | AlInGaP | Common Cathode | 560 |
| LSD2011AUR | LTS-2307CKR-P | Super Red | 631 | AlInGaP | Common Cathode | 560 |
| LSD2011AO | LTS-2307CKF-P | Orange | 605 | AlInGaP | Common Cathode | 720 |
| LSD2011AY | LTS-2307CKS-P | Yellow | 587 | AlInGaP | Common Cathode | 720 |
| LSD2011AG | LTS-2307CKG-P | Yellow Green | 572 | AlInGaP | Common Cathode | 720 |
| LSD2011AB | LTS-2307TBE-P | Blue | 470 | GaN | Common Cathode | 3500 |
| LSD2011AW | Cold White | x=0.27 | GaN | Common Cathode | 8000 | |
| LSD2011APW | Pure White | x=0.30 | GaN | Common Cathode | 8000 | |
| LSD2011BR | LTS-2807CKG-P | Yellow Green | 639 | AlInGaP | Common Anode | 560 |
| LSD2011BUR | LTS-2807CKD-P | Hyper Red | 631 | AlInGaP | Common Anode | 560 |
| LSD2011BO | LTS-2807CKR-P | Super Red | 605 | AlInGaP | Common Anode | 720 |
| LSD2011BY | LTS-2807CKF-P | Orange | 587 | AlInGaP | Common Anode | 720 |
| LSD2011BG | LTS-2807CKS-P | Yellow | 572 | AlInGaP | Common Anode | 720 |
| LSD2011BB | LTS-2807TBE-P | Blue | 470 | GaN | Common Anode | 3500 |
| LSD2011BW | Cold White | x=0.27 | GaN | Common Anode | 8000 | |
| LSD2011BPW | Pure White | x=0.30 | GaN | Common Anode | 8000 |
| Parameter | Electrical optical Characteristics[1] | Absolute Maximum Ratings[1] | ||||
| Emitted color | Forward Voltage @ IF=20mA | Reverse Current VR=5V | Power Dissipation | DC Forward Current | Peak Forward Current[2] | |
| Per Chip | Typ. | Max. | ||||
| Super Red | 2.0 | 2.6 | 30 | 60 | 20 | 100 |
| Ultra Red | 2.0 | 2.6 | 30 | 65 | 20 | 100 |
| Orange | 2.0 | 2.6 | 30 | 65 | 20 | 100 |
| Yellow | 2.0 | 2.6 | 30 | 65 | 20 | 100 |
| Green | 2.0 | 2.6 | 30 | 75 | 20 | 100 |
| Pure Green | 3.0 | 3.6 | 30 | 85 | 20 | 100 |
| Blue | 3.0 | 3.6 | 30 | 85 | 20 | 100 |
| White | 3.0 | 3.6 | 30 | 85 | 20 | 100 |
| Unit: | V | V | uA | mW | mA | mA |
Notes :
1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (Commission
International De L'Eclariage) eye-response curve
2. Reverse voltage is only for IR test. It cannot continue to operate at this situation
3. Cross talk specification <= 2.5%
6. Recommended SMT condition:
NOTES:
1.We recommend th e reflow tem perature 245ºC (+/-5ºC ).The maximum
soldering temperature should be l imited to 260ºC .
2.Don't cause stress to t he epoxy res in while it is exposed to
high t emperature.
3.Number of reflow process shall be 2 times or less.
7. SMD Packing: Blister pack or Tape and Reel Pack
Contact us for more details.
Our QC System:
Factory Overview and production process
Our Services/Why choose LITEKEY
1. Professional service: replied within 24 hours(at workdays).
2. Various ready moldings of lamp led are available: no need to afford extra fee for moldings.
3. We also can provide customized products, design according to your demand.
4. Reliable and stable quality: 100% testing for each piece. Automatic testing and bin code selection machine.
5. Experience: produce LED components for more than 14 years.
6. Advanced Equipment: ASM automatic production machines(biggest brand in LED automatic machines)
7. Concentration: We focus on LED research and development, production and sales.
