Complaint
| Parameter | Symbol | Min | Typical | Max | Unit | Notes |
| Differential input impedance | Zin | 90 | 100 | 110 | ohm | |
| Differential input impedance | Zout | 90 | 100 | 110 | ohm | |
| Differential input voltage amplitude | ΔVin | 300 | 1100 | mVp-p | ||
| Differential output voltage amplitude | ΔVout | 500 | 800 | mVp-p | ||
| Input Logic Level High | VIH | 2.0 | VCC | V | ||
| Input Logic Level Low | VIL | 0 | 0.7 | V | ||
| Output Logic Level High | VOH | VCC-0.5 | VCC | V | ||
| Output Logic Level Low | VOL | 0 | 0.4 | V |
| Parameter | Symbol | Min | Typical | Max | Unit | Notes |
| Wavelength Assignment | L0 | 1264.5 | 1271 | 1277.5 | nm | |
| L1 | 1284.5 | 1291 | 1297.5 | nm | ||
| L2 | 1304.5 | 1311 | 1317.5 | nm | ||
| L3 | 1324.5 | 1331 | 1337.5 | nm | ||
| Transmitter | ||||||
| RMS Spectral Width | λrms | 3.5 | nm | 1 | ||
| Average Launch Power, each lane | PAVG | 2.5 | dBm | |||
| Optical Modulation Amplitude (OMA) | POMA | -4 | 2.5 | dBm | 1 | |
| Difference in Launch Power between any two lanes | Ptx,diff | 4.0 | dB | |||
| Transmitter and Dispersion Penalty per Lane | TDP | 3 | dBm | |||
| Rise/Fall Time | Tr/Tf | 30 | ps | |||
| Extinction Ratio | ER | 3.5 | dB | |||
| Transmitter Reflectance | RT | -12 | dB | |||
| Transmitter Eye Mask Margin | EMM | 10 | % | 2 | ||
| Average Launch Power OFF Transmitter, each Lane | Poff | -30 | dBm | |||
| Transmitter Eye Mask Definition {X1, X2, X3, Y1, Y2, Y3} | {0.31, 0.4, 0.45, 0.34, 0.38, 0.4} | |||||
| Receiver | ||||||
| Damage Threshold | THd | 3.5 | dBm | |||
| Overload, each lane | OVL | 2.5 | dBm | |||
| Receiver Sensitivity in OMA, each Lane | SEN | -10 | dBm | 3 | ||
| Signal Loss Assert Threshold | LOSA | -24 | -13.6 | dBm | ||
| Signal Loss Deassert Threshold | LOSD | -11.6 | dBm | |||
| LOS Hysteresis | LOSH | 1.5 | dB | |||
| Optical Return Loss | ORL | -12 | dBm | |||
| Parameter | Symbol | Min | Max | Unit | Notes |
| Temperature monitor absolute error | DMI_Temp | -3 | +3 | ºC | Over operating temperature range |
| Supply voltage monitor absolute error | DMI_VCC | -0.1 | +0.1 | V | Over full operating range |
| Channel RX power monitor absolute error | DMI_RX_Ch | -3 | 3 | dB | |
| Channel Bias current monitor | DMI_Ibias_Ch | -10% | +10% | mA | |
| Channel TX power monitor absolute error | DMI_TX_Ch | -3 | 3 | dB |
