Description
| Genset Model | YDNC-200 |
| Rated Power (kW/kVA) | 200/250 |
| Rated Current (A) | 360 |
| Dimension (mm) | 2900*1100*2000 |
| Gross Weight (kg) | 3300 |
| Natural gas Engine | Brand | CUMMINS |
| Model | GTA855 |
| Configuration | Four-stroke,Water-cooling,Direct Injection,6L-type |
| Rated Power (kW/kVA) | 240/300(CH4 no less than 85%) |
| Rated Speed (rpm) | 1500 |
| Cylinder No. | 6.L |
| Bore*Stroke (mm) | 140×152 |
| Cooling Method | Water cooling |
| Oil Consumption (g/kw.h) | 1 |
| Gas Consumption (m3/h) | ≤60@100Load |
| Starting method | 24V DC |
| Gas control system | E-Throttle | BOSCH®(German Brand) |
| MIXER | IMPCO®(USA Brand) |
| Regulator | MADAS®(Italian Brand) |
| Spark plug | TORCH®(China Brand) |
| Water temperature | BOSCH®(German Brand) |
| Alternator | Brand | FARRAND |
| Model | FLD-200 |
| Rated Power (kW/kVA) | 200/250 |
| Material | High performance 100% copper |
| Efficiency | 94.50% |
| Voltage Regulation | <=±1 |
| Voltage Regulation | Brushles, Self Excitation |
| Insulation Class | H |
| Control System | Brand | SMARTGEN |
| Model | HGM6110N |
| Working Voltage | DC8.0V to DC35.0V, continuous |
| Overall Dimensions (mm) | 197*152*47 |
| Panel Cutout (mm) | 186*141 |
| Working Condition | Temperature: (-25~70)ºC; Humidity: (20~90)% |
| Weight | 0.56kg |
Requirments for natural gas
1.Methane should be at least 85%
2.The natural gas temperature should be between 0-60 ºC
3. No inpurity should be in the gas. Water in the gas should be less than 20g/Nm3.
4. Heat value should be at least 8500kcal/m3, if less than this value, the power of the engine will be declined.
5. Gas pressure should be 8-14KPa, if the pressure is less than 3KPa, booster fan is necessary.
6.The gas should be dehydrated and desulfurated. Make sure that there is no liquid in the gas. H2S<200mg/Nm3
Complaint
