Drop Fuses RW12-15 high-voltage wire fixture consists of three parts: insulating support, movable and static contacts, and fuse tube. The static contacts are installed at both ends of the insulating support, and the fuse tube consists of the inner arc extinguishing tube and the outer phenolic paper tube or epoxy glass fiber cloth tube.
The Drop Fuses is suitable for frequency 50HZ, rated voltage of 35KV and below in the power system, installed in the distribution transformer high voltage side or distribution of the trunk line. The main functions are not high requirements for the protection performance of the place, it can be used in conjunction with the disconnecting switch, instead of automatic air switch; can also be used in conjunction with the load switch, instead of expensive circuit breakers. It also has short circuit protection, overload and isolation circuit.
Normal use conditions of the product: temperature not higher than +40 degrees, not lower than -40 degrees; altitude not exceeding 1000m wind speed not exceeding 35m/s; earthquake intensity not exceeding 8 degrees.
Complaint
