Complaint
1. Vertical mold opening, vertical injection, suitable for insert molding
2. Nitrided steel screw, material tube, high torque hydraulic motor drive, multi-stage injection pressure, good plasticizing performance.
3. Direct pressure mother-mold lock cylinder design, rapid mold clamping, low-pressu safety mold clamping, automatic mold closing, multiple pressure control, high safety and improved mold life.
4. Electrical protection device, no mistakes, maintenance operator safety.
5. Automatic fault display, maintenance is quick and easy.
6. Electronic control and hydraulic use brand-name parts, quiet, precise and durable.
7. Multi-stage temperature control, multi-stage injection pressure, rate of fire, back pressure stepless adjustment, suitable for molding of precision plastic parts.
8. Optional servo energy-saving motor.
9. This machine offers a wide range of programmable functions including automatic inclusion, extraction and fully-automatic production.
| Specification | Model | ||||||||||||||||||||
| Unit | YT-150 | YT-300 | YT-450A | YT-550A | YT-850A | YT-1200A | YT-1500A | ||||||||||||||
| Screw Diameter | mm | 22 | 25 | 25 | 28 | 32 | 28 | 32 | 36 | 32 | 36 | 40 | 36 | 40 | 45 | 40 | 45 | 50 | 45 | 50 | 55 |
| Injection Pressure | kgf/cm2 | 1715 | 1098 | 1434 | 1143 | 875 | 2170 | 1661 | 1312 | 2180 | 1722 | 1395 | 2176 | 1763 | 1393 | 2296 | 1810 | 1470 | 2063 | 1671 | 1381 |
| Injection Volume(Theoratical) | cm3 | 38 | 49 | 49.1 | 61.6 | 80.1 | 73 | 96 | 122 | 112 | 142 | 176 | 163 | 201 | 254 | 226 | 286 | 353 | 318 | 392 | 475 |
| Injection Weight | g | 34 | 44 | 45 | 57 | 73 | 66 | 87 | 109 | 100 | 127 | 158 | 147 | 181 | 229 | 203 | 257 | 317 | 286 | 352 | 427 |
| oz | 1.2 | 1.6 | 1.6 | 2 | 2.6 | 2.3 | 3 | 3.8 | 3.5 | 4.5 | 5.6 | 5.2 | 6.4 | 8.1 | 7.1 | 9.1 | 11.1 | 10.1 | 12.4 | 15.1 | |
| Injection Rate | cm3/sec | 20 | 30 | 75 | 93 | 122 | 41 | 53 | 68 | 51 | 64 | 80 | 86 | 106 | 134 | 115 | 146 | 180 | 145 | 179 | 217 |
| Screw Stroke | mm | 100 | 100 | 120 | 140 | 160 | 180 | 200 | |||||||||||||
| Temperature Section | 3 | 3+1 | 3+1 | 3+1 | 3+1 | 4+1 | 4+1 | ||||||||||||||
| Hopper Capacity | Liter | 15 | 20 | 30 | 30 | 30 | 30 | 32 | |||||||||||||
| Clamping Force | ton | 15 | 30 | 45 | 55 | 85 | 120 | 150 | |||||||||||||
| Platen Size | mm | 430*290 | 520*370 | 580*430 | 720*560 | 880*640 | 965*765 | 1070*860 | |||||||||||||
| Space between Tie Bars | mm | 320*180 | 360*205 | 405*255 | 505*340 | 565*320 | 635*410 | 720*505 | |||||||||||||
| Min. Mould Height | mm | 80/140 | 100/140/160/200 | 150/190/210/250 | 200/240/260/300 | 200/240/260/300 | 250 | 300 | |||||||||||||
| Opening Stroke | mm | 180 | 180 | 200 | 200 | 250 | 300 | 300 | |||||||||||||
| Max. Open Daylight | mm | 260/320 | 280/320/340/380 | 350/390/410/450 | 400/440/460/500 | 450/490/510/550 | 550 | 600 | |||||||||||||
| Ejector Force | ton | 1.7 | 1.7 | 1.7 | 2.7 | 4 | 4 | 4 | |||||||||||||
| Ejector Stroke | mm | 55 | 55 | 55 | 55 | 75 | 115 | 115 | |||||||||||||
| Max.hydraulic pressure | kgf/cm2 | 140 | 140 | 140 | 140 | 140 | 140 | 140 | |||||||||||||
| Tank Volume | Liter | 80 | 180 | 207 | 227 | 350 | 485 | 485 | |||||||||||||
| Pump Motor Power | kw | 4 | 5.5 (4) | 5.5 | 7.5 | 15 | 18.5(4) | 18.5(4) | |||||||||||||
| Heater Power | kw | 2 | 3.8 | 4.75 | 5.55 | 5.95 | 7.85 | 9.05 | |||||||||||||
| Total Power | kw | 6 | 9.3 | 10.25 | 13.05 | 20.95 | 26.35 | 27.55 | |||||||||||||
| Machine Weight | ton | 0.75 | 0.9 | 1.1 | 1.5 | 3.0 | 6.5 | 7.2 | |||||||||||||
| Machine Dimension | m | 1.8*0.9*2.4 | 1.65*1.1*2.75 | 1.7*1.15*3 | 1.8*1.15*3.35 | 1.95*1.25*3.5 | 2.0*1.3*4.0 | 2.3*1.3*4.6 | |||||||||||||
Plastic Injection Molding Machine
Consist of plasticizing system, injection system, the clamping system and transmission system of plastic injection molding equipment. Our company use die casting technologies applied to injection molding machines for many years.
In mechanical, hydraulic, electric control, etc for comprehensive improvement, perfect combination of dynamic pressure casting and speed.
Advantage:
1. Clamping Unit
Reliable 5-pint twin-toggle locking mechanism; Platens are designed under Finite Element Analysis; High speed clamping is stable while low pressure protection is accurate; Automatic lubrication system; Oil shortage alarm; Ejector stroke precisely controlled by transducer; Plenty of ejector modes for you to choose.
2. Injection Unit
Double-cylinder balance injection system; Shot weight is precisely controlled by transducer;
Using hydraulic motor to carry out variable speed.
3. Hydraulic Unit
Domestic high-tech divided hydraulic system; Hydraulic safety device; Imported high quality
hydraulic components are applied.
4. Electric Unit
Special controller for plastic injection molding machine; All the main components are imported from famous company, for example: TE(France), Gefran(Italy),etc.
