Complaint
| Electric 4 Seats Golf Cart | ||
| Electrical system | Electrical control | Brushless DC controller |
| Battery | Maintenance-free battery 12V/32A units, 5 units | |
| Motor | Dc brushless 60V/1KW | |
| Charger | Computer intelligent charger,input voltage 220V-50Hz | |
| Charging time | Less than 8 hours(80% discharge rate) | |
| Body configuration | Front rail | Acrylic glass |
| Seats | Leather soft seat | |
| Rearview mirror | One manual external rearview mirror on each side | |
| Top canopy | Sail tarpaulin material | |
| Flooring | Aluminum patterned board | |
| Steering system | 6330 two-way rack and pinion steering system | |
| DC,Light and signals | 60V/12V-100W, turn signal, rear taillight, horn, reverse buzzer | |
| Bodywork | Fiberglass body | |
| Instrument table | Electric meter, electric lock switch, steering switch, reversing switch, horn switch | |
| Braking system | Rear-wheel disc hydraulic brake + handbrake parking | |
| Front axle and suspension | Leaf springs | |
| Rear axle and suspension | Integral rear axle, spring plate | |
| Tire diameter(mm) | 350-10 | |
| Technical parameters | Length * width * height (mm) | 2880 * 1130 * 1690 |
| Rated crew (people) | 4 | |
| Maximum travel speed(km/h) | ≤10km/h | |
| Driving range(km) | 50 (level road) Lithium batteries can be customized according to customer needs | |
| Safe grade | 7% | |
| Minimum turning radius (m) | 6.5 | |
| Minimum ground clearance(no load/full load) | 130/120 (mm) | |
| Wheelbase | 2230 (mm) | |
| Wheel gauge | Front 920/ Rear 920 (mm) | |
| Braking distance(no load/full load) | 3.5m/4.5m | |
quality guarantee
1.Our company guarantees that the supplied vehicles are brand new, unused original qualified products, and ensure that the provided vehicles have good performance during their service life under normal maintenance conditions of correct installation and normal use.
2.Our company is committed to the quality standards of the supplied vehicles in accordance with the relevant national quality and technical standards and relevant laws and regulations and provisions of the implementation of the requirements, and not lower than the original manufacturer's quality assurance regulations and relevant supply standards for the supply of counterfeit and shoddy products.
after-sales service
1.Promise to provide permanent maintenance services, vehicle warranty for one year, after the warranty period to provide paid services.
2.Regular return visit maintenance: Telephone return visit every 3 months, timely understanding of the buyer's opinions and suggestions, in order to promote the company's after-sales service work to further improve.
After-sales proces
1.The customer provides product information, unit information and contact information by telephone or email message, and describes the cause of the problem to the manufacturer.
2.After receiving the information, the manufacturer will try to deal with it as soon as possible.
3.Provide a solution to the problem described by the customer until the customer is satisfied.
Workshop pictures
