Complaint
How to Use:
Note: Carry out a trial run for at least 30s under no load, and use it after confirming that there is no abnormality; the air pipe must be placed at the back end during operation to prevent accidents; the machine must be held with both hands during work and ensure Stand on a stable footing; suddenly stop the gas during work, you must immediately set the switch to the off state; during the grinding and polishing process, you should apply force evenly, and it is strictly forbidden to use too much force, or hit the object.
Specification:
Item Type: Air Sander
Material: Zinc Alloy + Rubber
Weight: Approx. 1047g / 36.9oz
Plate Size: Approx. 12.5x12.5cm / 4.9x4.9in
Air Consumption: 8cfm
No Load Speed: 10000rpm
Air Inlet: 1/4
Scope of Application: Home decoration, handicraft polishing, burr trimming, etc
Package List:
1 x Air Sander
1 x Wrench
1 x Adapter
1 x Manual
Note:
1. Please allow 01 inch error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
Sino abrasives designs, develops, integrates and manufactures a complete range of cutting, grinding and polishing products for all kinds of customers. Including, Superhard materials- Diamond tools, CBN tools, T.C.T tools, Resin bonds abrasives, Sanding tools, Non-woven tools and so on.
Raw material cost advantages:
Sino abrasives limited are cooperated with the best partners including international suppliersand domestic suppliers:3M, NCA BUFFALO, CUMI, SINOMACH, ZHONGNAN, ZZSM and so on.
Quality supervise system
We firmly believe that management is the first productive force. Sino abrasives limited had been certificated by ISO 9001 at 2009.
Meanwhile, we had built ourselves quality management system- Smart system. Advanced chemical analysis equipment, scientific quality control methods, strict management system had ensured we can do standardized regulation and information records for daily work: it starts from raw materials, to production, to the finished product testing and so on.
1. Are you are a manufacturer?
A: Yes, we have our own factory, and have excellent research team, and strict quality inspection procedures. We will sure don't
have middleman. Also welcome you visit our factory.
2. What about your quality?
A: We have strict quality inspection procedures, and each of our ner products have been tested before launching it in the market.
3. Can you provide samples?
A: Yes, we can provide samples for you, yet the express fee need be paid by you.
4. If you don't have the size I need, can I have a requirement?
A: Yes, if the size you need we don't have, we can manufacturer as your requirement. It will have a minimum order.
