SN. | Name | Qty | Specifications | Remark |
Hopper | 1set | a. Stainless steel b. Volume:Φ1000×600 | ||
Vacuum loader | 1set | Re-enforced hose:15M | ||
Extruder | 1set | a. Screw diameter: Φ80 b. L/D=30/1 c. Driving power: 18.5KW d. Heating power: 20KW e. Heating zone: 5pcs f. Screw rev:20-70rmb g. Max. capacity:75kg/h | ||
Spinning beam | 1set | a. Installation method: top mounted b. Uniform-temperature method: biphenyl steam(heat-transfer oil) c. Designed temp. 310ºC d. Melt pipe designed pressure: Before pump:25 Mpa, after pump:35Mpa e. Heating power:26kw f. Stop valve:4pcs | ||
Heat-preservation beam | 1set | |||
Spinning pump drive | 4pcs | a. Motor: 1.1KW*4 b. Driving method: vertical c. Speed reducer:59:1 | ||
Spinning pump | 4pcs | a.Type:JRA4*10CC/r*4pcs | ||
Spinning pack (Each spin pack has two spinnerets) | 16pcs | a.Spinneretdiameter:Ø140mm b. Filtering method: filter net c.Quantity of spinneret:16pcs | ||
Quenching chamber | 1set | a.Quantity of Air window position:1positon b.Quenching area of each window: 2100×1600mm c. Filtering and uniform-pressure method: beehive plate + perforated plate d. Air regulator + pipes+ heat exchanger + air motor+ air filter | ||
Quenching chamber air conditioner | 1set | a. Air motor(5.5kw)+ heat exchanger 1set b. Air temperature sensor+air temperature meter& control units+ air motor frequency inverter control system | ||
Winding machine | 1set | a. Finish applicator: Φ150X350(L) b. Fiber finish (oiling) :oil roll c.Rev:10-40rpm d. Timing method: Stepless frequency converter timing | ||
Hot godet | 10sets | a. Specification: Φ210X350 b. Heating power: 8kw. c.Motor power: synchronous motor 3.6kw d. Heating method: Induction single zone heating e. Coating: Chrome f. Direction adjustment: 360o adjustable g. heat insulation method: air cooling | ||
Tangle unit/ Intermingling unit | 1set |
| ||
Take-up Winder | 1set | a. Model: JHA635 b. Quantity of yarn package per position:8pcs c. Max. yarn cake size:Φ400×100 d. Mechanical speed(m/min) :3500 e. Winding power:1.5kw*4 f. Bobbin Chuck:920×Φ94(L*OD) g. Auto Doffing | ||
Suction gun | 1pcs | |||
Spinning chimney | 1set | 1600mm×150mm(L*W) | ||
Spinning temperature control box | 1set | a. Single point self-control b. RKC meters Screw heating zone: 5pcs Screw extruding head :1pcs Pre-filter:2pcs Beam: 1pcs Spare parts:1pcs c. Temp. control precision ±0.5ºC | ||
Spinning pressure control box | 1set | a. Pressure is controlled by frequency converter AC, frequency converter is from FUJI, Japan b. Before and after filtering pressure to be indicated on the surface of the control box c. The screw extruder is equipped asynchronous AC Motor, with frequency converter timing and brake d. Frequency converter :18.5kw E.Pressure system: Sando, famous brand in China | ||
Spinning pump drive control box | 1set | a. It is controlled by one frequency converter(4.0kw) and control one metering pump motors b. frequency converter is from FUJI, Japan(4.0kw):1pcs | ||
Draw hot godet control box | 1set | a. Single point self-control b. Equipped with RKC meters, and the each heating godet temp. is controlled by each counterpart thermo-meter. c. Temperature control precision: ±0.5 d. The temperature is made by air, and the air volume is adjustable e. Thermo meters:18pcs | ||
Winding and drawing control box | 1set | a. One frequency inverter (11kw) controls a pair of heating godets. It is equipped with AC frequency inverter. b. Frequency Inverter is from Sanken, Japan. which can prevent instant-stop and inverse drawing. | ||
PLC, human-machine interface | 1set | |||