This is laminas para techo máquina para fabricar , suitable for Aluzinc ,galvanized steel and other harder coils , the finished sheet usually worked for roof and wall panel . It has beautiful water wave design , now is widely used in all over the world . 5 ribs metal material roofing sheet roll forming machine
LT7 890 model Indonesia hot Trapezoidal deck panel roll forming machine
1 | Power Requirement | Voltage | 380v/3ph/50hz |
Main Motor power | 7.5kw servo motor |
Cutter power | 5.5kw motor cutting |
2 | Forming speed | 20m/min-28m/min |
3 | Forming stations | 18 row /20 row |
4 | Forming shaft diameter | 80mm |
5 | Chains | 1 inch |
6 | Type of cutting | Roll formed and length-set cutting |
7 | Control system | PLC Delta Brand |
8 | Install dimension(depend on the final design) | 10.2m×1.5m×1.8m |
9 | Total weight (Approx) | 7.5T |
Packing and Shipping 1. Steel Profile Ibr Roof Panel Sheet Roll Forming Machine need one 20/40 feet container to load .
2.We have professional technicians for loading to make sure machine has no damage.
3.Please provide us the nearest port name, we will ask shipping cost and arrange shipping for you.
Company Introduction
FAQ1. Can you make the machine according to my design or photo type? A: Yes. We have an experienced engineers to work out the most suitable design and production plan for the machine.
2: How can we be assured that you will deliver us quality machine with spare parts? A:1. Customers to send the technical people to our factory for checking the quality.
2.We can send the technicians to the buyer`s factory for the installation and trainning .
3.What about your warranty? A: Within the One-YEARS period, we could supply you the replacement parts for free .
If any damaged parts caused by quality problems after two years,we will also help but customer pay the cost .
More information please send inquiry to us , you will get reply within 12 hours !