Auto Automobile Spare Parts Testing Industry Nitrogen Oxygen Sensor for Cummins OEM 4307746 A043A822

Min.Order: 2
Product origin: Xingtai, Hebei, China
Infringement complaint: complaintComplaint
US$ 1 ~ 50

Description
 

Detailed Photos

Product Description

Product Parameters
Key Features: Operating Temperature Range:
Measuring RangeNOx:0~2000ppm 
O2:-12%~21%
Minimum Ambient Temperature−40ºC
NOx Accuracy0~100ppm : 0±10ppm; 

100ppm~500ppm : ±10%; 

500ppm~1500ppm : ±15%;
  
1500-2000ppm: ±30%
Maximum ambient temperature105ºC
Maximum Working Time At 105ºC-115ºC24 H
Minimum Storage Temperature Without Charging-40ºC
O2 Accuracy0%~5%:±0.25%; 
5%~21% : ±5%;
Maximum Storage Temperature Without Charging120ºC
Maximum Storage Time2 Years
Start Time (Light off)Status Bit OK Within 100sMaximum Acceptable Exhaust Gas Temperature800ºC
Response TimeResponse TimeCan Work In 950°Exhaust Gas For Up To100 H
Maximum Temperature Of Hexagon Nut620ºC
Supply Voltage12V,24VHexagon Nuts Can Operate In 650ºC Environments For Up To100 H
Design Life6000h Or 350000kmMaximum Temperature Of Metal Buckle200ºC
Cable Length410mm, 650mm, 950mmMetal Clips Can work In A 220ºC Work Environment For Up To100 H
Temperature800ºCThe Harness Can Operate For Up To100 H
 
Basic Electrical Properties
supply voltageMinimum supply voltage: 12 V 
Minimum sensor heating voltage: 12V 
Standard power supply voltage: 24 V 
Maximum supply voltage: 36 V
The nitrogen oxygen sensor 4 pin 
connector terminal has the function of 
preventing reverse connection
Power supply currentAverage current: 0.5A
Starting peak current: 12A
Inrush current (DC/DC):>20A( μ sec)
powerMaximum power: 20W
CAN lineMinimum line voltage: - 3 V
Maximum line voltage: 36 V
The CAN line does not have a harness terminal
connectorNumber of connector legs: 5
Corresponding connector type:
 Hirschmann MLK 872-860-501
Pin definition: 
1: Power supply voltage
2: Ground
3: CAN low
4: CAN high
5: Hanging - standard address; Location-Optional Address
 

Function Description

A ceramic sensor made of zirconia electrolyte measures the concentration of oxygen entering the first chamber from exhaust gas through a diffusion barrier layer through current measurement.The oxygen concentration in the chamber is controlled to a very small constant concentration.Other components in the exhaust gas also enter the chamber with HC, CO, and H2, and are oxidized on the pump electrode made of platinum.A small amount of PPM oxygen and nitrogen oxides enter the second chamber together from the first chamber, where all oxygen is pumped out by an auxiliary pump.On the measuring electrode, the dynamic balance equation NO<->N2+O2 has changed because the oxygen generated by the reduction of NO is pumped out.The concentration of nitrogen and oxygen in the exhaust gas is determined by measuring the current generated by the generation of oxygen, IP 2.

The electronic control unit (ECU) heats the sensor element to operating temperature by controlling power.The oxygen concentration and nitrogen oxygen concentration are obtained by collecting the current in all chambers through integrated circuits.The nitrogen oxygen sensor transmits the gas concentration information to the engine ECU through a CAN message.
The nitrogen oxygen sensor transmits the gas concentration information to the engine ECU through a CAN message.
 
As there are wide variety products, please confirm with us before placing an order.

Certifications

Packaging & Shipping

Company Profile

Qinghe County ZhiRui Plastic & Rubber Technology Co., Ltd was founded in 1992, we are a manufacturer that specialized in producing auto plastic and rubber parts for more than 20 years. The factory is located in Qinghe, Hebei Province-the Auto & Motorcycle Parts Production Base in Northern China. We have more than 20 sets of production equipment, including 2 large-scale injection molding machines, 8 medium-sized injection molding machines and 10 small-sized injection molding machines. Our leading products cover: Electric car dashboard, Air filter assembly, Radiator fan guard, Auto hose assembly, Trim panel series, Shock absorber boot and splash guard, Quick release coupling, children's cart accessories and other auto plastic and rubber parts. Our products are popular both in domestic and international market.

Exhibition & Customers

FAQ

1. who are we?
We are based in hebei, China, start from 2015,sell to Domestic Market(55.00%),Mid East(10.00%),Western Europe(10.00%),North America(5.00%),Eastern Europe(5.00%),South Asia(5.00%),Southeast Asia(3.00%),Africa(3.00%),South America(2.00%),Eastern Asia(2.00%). There are total about 51-100 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
Plastic and Rubber Parts

4. why should you buy from us not from other suppliers?
We are manufacture and specialist for Mercedes benz ,bmw ,PSA ,citroen,bmw mini parts.

5. what services can we provide?
Accepted Delivery Terms: FOB;
Accepted Payment Currency:USD,EUR,HKD,CNY;
Accepted Payment Type: T/T,L/C,PayPal,Western Union,Cash,Escrow;
Language Spoken:English, Chinese

 

 

 

 

 

 

 

 

 

 

Product Tag:
Related categories:
Scroll to Top