Complaint
| Key Features: | Operating Temperature Range: | |||
| Measuring Range | NOx:0~2000ppm O2:-12%~21% | Minimum Ambient Temperature | −40ºC | |
| NOx Accuracy | 0~100ppm : 0±10ppm; 100ppm~500ppm : ±10%; 500ppm~1500ppm : ±15%; 1500-2000ppm: ±30% | Maximum ambient temperature | 105ºC | |
| Maximum Working Time At 105ºC-115ºC | 24 H | |||
| Minimum Storage Temperature Without Charging | -40ºC | |||
| O2 Accuracy | 0%~5%:±0.25%; 5%~21% : ±5%; | Maximum Storage Temperature Without Charging | 120ºC | |
| Maximum Storage Time | 2 Years | |||
| Start Time (Light off) | Status Bit OK Within 100s | Maximum Acceptable Exhaust Gas Temperature | 800ºC | |
| Response Time | Response Time | Can Work In 950°Exhaust Gas For Up To | 100 H | |
| Maximum Temperature Of Hexagon Nut | 620ºC | |||
| Supply Voltage | 12V,24V | Hexagon Nuts Can Operate In 650ºC Environments For Up To | 100 H | |
| Design Life | 6000h Or 350000km | Maximum Temperature Of Metal Buckle | 200ºC | |
| Cable Length | 410mm, 650mm, 950mm | Metal Clips Can work In A 220ºC Work Environment For Up To | 100 H | |
| Temperature | 800ºC | The Harness Can Operate For Up To | 100 H | |
| Basic Electrical Properties | |
| supply voltage | Minimum supply voltage: 12 V Minimum sensor heating voltage: 12V Standard power supply voltage: 24 V Maximum supply voltage: 36 V The nitrogen oxygen sensor 4 pin connector terminal has the function of preventing reverse connection |
| Power supply current | Average current: 0.5A Starting peak current: 12A Inrush current (DC/DC):>20A( μ sec) |
| power | Maximum power: 20W |
| CAN line | Minimum line voltage: - 3 V Maximum line voltage: 36 V The CAN line does not have a harness terminal |
| connector | Number of connector legs: 5 Corresponding connector type: Hirschmann MLK 872-860-501 Pin definition: 1: Power supply voltage 2: Ground 3: CAN low 4: CAN high 5: Hanging - standard address; Location-Optional Address |
A ceramic sensor made of zirconia electrolyte measures the concentration of oxygen entering the first chamber from exhaust gas through a diffusion barrier layer through current measurement.The oxygen concentration in the chamber is controlled to a very small constant concentration.Other components in the exhaust gas also enter the chamber with HC, CO, and H2, and are oxidized on the pump electrode made of platinum.A small amount of PPM oxygen and nitrogen oxides enter the second chamber together from the first chamber, where all oxygen is pumped out by an auxiliary pump.On the measuring electrode, the dynamic balance equation NO<->N2+O2 has changed because the oxygen generated by the reduction of NO is pumped out.The concentration of nitrogen and oxygen in the exhaust gas is determined by measuring the current generated by the generation of oxygen, IP 2.
Qinghe County ZhiRui Plastic & Rubber Technology Co., Ltd was founded in 1992, we are a manufacturer that specialized in producing auto plastic and rubber parts for more than 20 years. The factory is located in Qinghe, Hebei Province-the Auto & Motorcycle Parts Production Base in Northern China. We have more than 20 sets of production equipment, including 2 large-scale injection molding machines, 8 medium-sized injection molding machines and 10 small-sized injection molding machines. Our leading products cover: Electric car dashboard, Air filter assembly, Radiator fan guard, Auto hose assembly, Trim panel series, Shock absorber boot and splash guard, Quick release coupling, children's cart accessories and other auto plastic and rubber parts. Our products are popular both in domestic and international market.
1. who are we?
We are based in hebei, China, start from 2015,sell to Domestic Market(55.00%),Mid East(10.00%),Western Europe(10.00%),North America(5.00%),Eastern Europe(5.00%),South Asia(5.00%),Southeast Asia(3.00%),Africa(3.00%),South America(2.00%),Eastern Asia(2.00%). There are total about 51-100 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Plastic and Rubber Parts
4. why should you buy from us not from other suppliers?
We are manufacture and specialist for Mercedes benz ,bmw ,PSA ,citroen,bmw mini parts.
5. what services can we provide?
Accepted Delivery Terms: FOB;
Accepted Payment Currency:USD,EUR,HKD,CNY;
Accepted Payment Type: T/T,L/C,PayPal,Western Union,Cash,Escrow;
Language Spoken:English, Chinese
