High quality/High cost performance Rdj2 Series Thermal Over-Load Relay 26~630A People Electrical

Min.Order: 100

Product origin: Wenzhou, Zhejiang, China

Infringement complaint:

Complaint

US$ 0.1 ~ 6.37

Description

RDJ2 (LR2) series bimetallic type thermal over-load relay is suitable for the circuit of AC 50Hz/60Hz, rated operating voltage Ue:660V, rated current 0.10~630 (A), as the use of over-load, break phase, and protection of motor and circuit. The structure and main technique performance index of this thermal relay is the same as the LR2 series thermal relay, therefore, the LR2 series thermal relay can be entirely replaced by RDJ2 series thermal relay.

Thermal relay with the functions and characteristics of break phase protection temperature compensation, setting current adjusting, optional selection of auto-reset and manual reset, action indication signal, insulation separation of NO, NC auxiliary contacts, small installation section, and various installation modes. Moreover, it has tested and stopped push-buttons, and it can be inspected for action flexibility, has a protective cover that prevents the hand get shocked, is safe to use, with a locking device to prevent misoperation, etc. This product conforms to: GB14048.4, IEC60947-4-1, etc. standards.

Application

Ambient temperature: -5°C~+40°C, and the average value within 24h does not exceed +35°C
The altitude of the installation place does not exceed 2000m;
Atmosphere condition: The relative humidity does not exceed 50% when it is at +40°C, it allowed relatively high humidity at the relatively low temperature, for example, the relative humidity reaches 90% when +20°C and it should take special measurements when there is produced the condensation on the product due to the temperature variation.
It should be at the no explosion danger medium and the medium without the gas that cannot corrode the metal and damage the insulation as well as the places without conductive dust.
Grade of pollution: 3
Installation category: III
Installation position: installed at the normal position, the gradient between the installation side and the vertical side does not exceed ±5°, and without obvious vibration and impact.
Protection grade: IP 20.

Model No.

Main technique parameter

No.

Model

Rated current A

Setting current adjusting
scope A

Suited AC contactor
model

Suited fuse model

Bitmap

Cross section of
conductor mm²

RDJ2-25

0.1~0.16

CJX2-09~32

RDT16-00-2

0.16~0.25

0.25~0.4

0.4~0.63

0.63~1

1~1.6

RDT16-00-4

1.25~2

1.6~2.5

RDT16-00-6

2.5~4

RDT16-00-10

4~6

RDT16-00-16

5.5~8

7~10

RDT16-00-20

1.5

RDJ2-25

9~13

CJX2-12~32

RDT16-00--25

2.5

12~18

RDT16-00-40

17~25
17~25

CJX2-25,CJX2-32

RDT16-00-50

RDJ2-36

23~32

RDT16-00-63

28~36

CJX2-32

RDT16-00-80

RDJ2-93

23~32

CJX2-40~95

RDT16-00-63

30~40

RDT16-00-80

37~50

CJX2-50~95

RDT16-00-100

48~65

RDT16-1-125

55~70

CJX2-63~95

RDT16-1-160

63~80

CJX2-80,CJX2-95

80~93

CJX2-95

RDT16-1-200

RDJ2-200

200

80~125

CJX2-115,150,185,225

RDT16-1-250

100~160

RDT16-2-315

125~200

RDT16-2-400

RDJ2-630

630

160~250

CJX2-185,225,265,330,400

RTD16-3-500

120

200~320

RTD16-3-630

185

250~400

RTD16-4-800

240

315~500

CJX2-500,630

RTD16-4-1000

2*150

400~630

RTD16-4-1000

2*185

Shape and installation dimensions

1. What's your trading methods?

It's according to your request.

2.What's your Payment terms?

We accept kinds of payment terms,e.g.TT,L/C,O/A.

3.Would you accept to use our LOGO ?

If you have good quantity,it absolutely no problem to do OEM.

4.We want to know month capacity.

It depends on which model.

Any questions please feel free to contact us,we will reply you witin 8 hours.