Item | Cold rolled/Hot rolled alloy steel seamless pipe | |
Standard | ASTM A209M/ASME 209M, ASME SA210, ASTM A213/ASME SA213M ASTM A333M/ASME SA333/SA333M, ASTM A334M/ASME SA334/SA334M ASTM A335/ASME SA335, ASTM A519, ASTM A691 GB3087, GB6479-2000, GB9948-2006, GB5310-2013, GB5310-95, GB9948-88 DIN 17175, EN10216-2, JISG3467, JISG3458, JIS G3441, NF A49-213/215, BS3059, BS3604, BS3606 | |
Materials | A209 T1/SA209 T1, A209 T1b/SA-209 T1b, A209 T1a/SA209 T1a. T2, T5, T9, T11, T12, T22, T23, T24, T91, T911, T92, T122. P1, P2, P5, P5b, P5c, P9, P11, P12, P21, P22, P23, P24, P91, P92. 4118, 4130, 4135, 4137, 4140. 20G, 25MnG, 15MoG, 15CrMoG, 20MoG, 12CrMoG, 12Cr2MoG, 12Cr1MoVG, 12Cr2MoWVTiB, 10Cr9Mo1VNb, 15CrMoG, 10CrMo910. ST35.8, ST45.8, 15Mo3, 13CrMo44, 10CrMo910, 14MoV63,12Cr1MoV. P195GH, P235GH, P265GH, 13CrMo4-5, 10CrMo9-10, 16Mo3, 10CrMo5-5, X10CrMoVNb9-1. GRADE 91, CM65, CM70, CM75, CMSH70, CMS75, CMSH80. GRADE 1/2 Cr, GRADE 1CR, GRADE 1 1/4 CR, 2 1/4 Cr, 3CR, 5CR, 9CR. STPA12, STPA20, STPA22, STPA23, STPA24, STPA25, STPA26. SCR420 TK,SCM415 TK, SCM418 TK, SCM420TK, SCM430TK, SCM435TK, SCM440TK. TU15D3, TU13CD4-04, TU10CD910, TUZ10CD505. S1-622-440, S2-622-440, S1-622-490, S2-622-490, S1-629-470, S2-629-470, S2-629-590. HFS625 CFS625, CFS625. | |
Description | Surface | black painted, PE coated, galvanized |
Length | 5.8m, 6m, 11.8m, 12m, or as required | |
Wall Thickness | 1-120mm | |
Outer Diameter | 6-1200mm | |
Trade terms | Payment terms | T/T, L/C, D/P |
Price terms | FOB, CIF | |
Package | Standard export seaworthy package or as required. | |
Delivery time | Prompt delivery or as the order quantity. | |
Export to | Alloy steel pipe applies to petroleum,chemical industry, electric power, boiler, high temperature resistant, low temperature resistant,corrosion resistant seamless steel pipe used.Alloy steel pipealso can made according to the customer. | |
Container size | 20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High) 24-26CBM 40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High) 54CBM 40ft HC:12032mm(Length)x2352mm(Width)x2698mm(High) 68CBM | |
Contact | If you have any question,please feel free to contact me. |
Composition, % | |||
Element | Grade 1 | Grade 3 | Grade 6 |
Carbon, max | 0.30 | 0.19 | 0.30 |
Manganese | 0.40 - 1.06 | 0.31 - 0.64 | 0.29 - 1.06 |
Phosphorous, max | 0.025 | 0.025 | 0.025 |
Sulfur, max | 0.025 | 0.025 | 0.025 |
Silicon | 0.18 -0.37 | 0.10 min | |
Nickel | 3.18 - 3.82 |
Grade 1 | Grade 3 | Grade 6 | ||||
psi | MPa | psi | MPa | psi | MPa | |
Tensile Strength, min | 55,000 | 380 | 65,000 | 450 | 60,000 | 415 |
Yield Strength, min | 30,000 | 205 | 35,000 | 240 | 35,000 | 240 |
Longitudinal | Transverse | Longitudinal | Transverse | Longitudinal | Transverse | |
Elongation in 2 in. or 50 mm, (or 4D), min, %: | ||||||
Basic minimum elongation for walls 5/16 in. [8 mm] and over in thickness, strip tests, and for all small sizes tested in full section | 35 | 35 | 30 | 20 | 30 | 16.5 |
When the standard round 2-in. or 50-mm gage length or proportionally smaller size test specimen with the gage length equal to 4D (4 times the diameter) is used | 28 | 20 | 22 | 14 | 22 | 12 |
For strip tests, a deduction for each 1/32in. [0.8 mm] decrease in wall thickness below 5/16 in. [8 mm] from the basic minimum elongation of the following percentage | 1.75 | 1.25 | 1.50 | 1.00 | 1.50 | 1.00 |
Elongation in 2 in. or 50 mm, min, %: |
Wall Thickness | Grade 1 | Grade 3 | Grade 6 | ||||
in. | mm | Longitudinal | Transverse | Longitudinal | Transverse | Longitudinal | Transverse |
5/16 (0.312) | 8 | 35 | 25 | 30 | 20 | 30 | 16 |
9/32 (.281) | 7.2 | 33 | 24 | 28 | 19 | 28 | 15 |
1/4 (.250) | 6.4 | 32 | 23 | 27 | 18 | 27 | 15 |
7/32 (.219) | 5.6 | 30 | 26 | 26 | |||
3/16 (.188) | 4.8 | 28 | 24 | 24 | |||
5/32 (.156) | 4 | 26 | 22 | 22 | |||
1/8 (.125) | 3.2 | 25 | 21 | 21 | |||
3/32 (.094) | 2.4 | 23 | 20 | 20 | |||
1/16 (.063) | 1.6 | 21 | 18 | 18 |
Size of Specimen, min | Minimum Average Notched Bar Impact Value of Each Set of Three Specimens | Minimum Notched Bar Impact Value of One Specimen Only of a Set | Impact Temperature | ||||
ft-lbf | J | ft-lbf | J | Grade | Min Impact Test Temp | ||
10 by 10 | 13 | 18 | 10 | 14 | F | C | |
10 by 7.5 | 10 | 14 | 8 | 11 | 1 | -50 | -45 |
10 by 6.67 | 9 | 12 | 7 | 9 | 3 | -150 | -100 |
10 by 5 | 7 | 9 | 5 | 7 | 6 | -50 | -45 |
10 by 3.33 | 5 | 7 | 3 | 4 | |||
10 by 2.5 | 4 | 5 | 3 | 4 |