Complaint
VSMI-200A Intelligent Electromagnetic Vibrating Sifter Instrument
The VSMI-200A Intelligent electromagnetic vibrating sifter is an advanced laboratory sieving instrument. The instrument is simple and elegant in design, easy to install, simple to operate and stylish in appearance. The amplitude can be adjusted according to demand and is suitable for sieving a wide range of samples. It is suitable for particle size distribution testing of pharmacopoeia, coarse aggregates, fine aggregates, powder particles, particle size classification testing, etc..
The sieving software allows automatic weighing and uploading of the sample weight to the software, which automatically calculates the sieve residual, the mass percentage, the graded mass percentage (percentage on the sieve), the percentage under the sieve (percentage throughput) and the cumulative sieve residual (cumulative percentage on the sieve). The user can set up an administrator or operator to manage the operation. The sieving results can be saved and printed in unlimited quantities and an audit trail of the results of steps or tests already carried out is also available.
VSMI-200A
The Vibrating Sifter Features :
| Standards: Compliant with national standards GB/T6003.1-1997; GB/T6003.2-1997, compliant with the European Pharmacopoeia Ph.Eur.2.9.38 |
| Communication: the main unit has a 232 interface to communicate with the computer and the electronic scale. |
| Management: the instrument is equipped with an administrator login and an operator login, with different rights for the administrator and the operator |
| Drive: electromagnetic drive, which allows the sample to be thrown in three dimensions, so that the sieved sample is evenly dispersed over the entire screen, and when close to the sieve the particles block the holes and are thrown up again to allow smaller particles to pass through the holes. |
| Certificate: Each set of standard sieves has an inspection certificate from a national accredited department, supporting the user in third party testing, in accordance with the international standard ISO3310 ISO565 ASTME11 GB/6003.2-1997 GB/T6003.1-2012, sieve frame and screen material all stainless steel type 304 |
| Software: Equipped with SMART sieve analysis software, the sieve can be weighed, calculated and analysed automatically throughout the sieving process. The software can generate particle size distribution curves for all levels of the screen, which can be compared with the laser particle size meter data. |
| Fastening: fast and comfortable clamps, S-shaped duplex top cover for fast replacement of standard sieves |
| Control: 7" colour touch screen control, real time access to sieve data, sieve data at a glance |
| Setting: continuous, intermittent and timed sieving can be set up to cope with different sample sieving experiments |
| Visible: with a visible transparent top cover and a visible transparent ring to observe the entire sieving process |
| Storage: the sieving data can be saved and printed on the mainframe as well as on the PC, and the results can be exported or saved electronically |
| Functionality: electromagnetically driven sieving for higher separation accuracy and repeatable results in a shorter period of time with high energy three-dimensional tossing |
| Comparable: comparable and repeatable screening results across the industry |
| Efficiency: The sieving software is fully integrated into the sieving experiment, allowing you to experience a comfortable sieving process that reduces operator effort and increases efficiency |
| Measuring range: | dry 32 µm to 25 mm / wet 20 µm - 25 mm / ultrasonic precision sieving 5 µm - 25 mm |
| Amplitude setting: | 0.2-3 mm |
| Sieve diameters: | standard sieves of different diameters up to 203 mm |
| Sieve tower levels: | 5cm high standard sieve can be fitted with 10 levels, 25mm high standard sieve can be fitted with 16 levels |
| Sieve configuration: | various types of standard sieves (diameter/height) are available |
| Sample load: | 6 kg |
| Sieve tower height: | approx. 560 mm |
| Dimensions: (W x H x D): | 350*200*520mm |
| Overall machine weight: | 30kg |
| Vibration frequency: | 3000 to 3600 vibrations/min |
| Power supply: | 220v/110v 350w 50hz/60hz |
| Control mode: | 7 inch colour touch screen control |
| Vibration mode: | electromagnetic three-dimensional vibration |
| Sieving mode: | three-dimensional throwing motion |
| Sieving settings: | intermittent, continuous, timed |
| Software configuration: | automatic analysis of sieve residual, cumulative sieve residual, graded sieve residual, throughput rate, cumulative throughput rate, loss rate percentage, automatic generation of particle size distribution graphs |
Who we are
We are professional manufacturer & supplier specialized in Civil Engineering & Material testing equipments since 2003. We can supply various kinds of testing equipments that complies to the following standards ASTM/AASHTO, ISO, EN, DIN JIS, as well as other specialized industry standards. Meanwhile we are authorized oversea market distributer of some famous China testing equipments manufacturer. Our customers come from 6 Continents with more than 90 countries & area since company has been established.
Our advantages
1. Quality assurance--We aim to long term cooperation with every of our customer
2. Reasonable price -- we believe only reasonable price can guarantee reliable quality & service
3. Wide range products--we not only sale own products but also acting products of mulity famous China manufacturers, time saving, easier process, better quality & price, guaranteed service.
4. After-sales service guaranteed--all sold products enjoy 12 months warranty period since products claimed, free spare parts (the transportation cost payment depends on the weight & destination).
5. Fast response & professionalism-- 7/24 response either on sales inquiry or after-sales service, Monday to Friday response within 2 hours, weekend response within 6hours.
6. Multi payment modes--Wire transfer (T/T), Paypal (credit card), Western Union, L/C.
- CONSTRUCTION MATERIAL TEST EQUIPMENT
- SERVE REAL INSTRUMENTS INTRODUCTION
