Complaint
This plant is mainly used for waste mineral lubricating oil (including waste engine oil, lubricating oil, hydraulic oil, gear oil, mixed oil) regeneration. The base oil with good quality and a small amount of gasoline and water are obtained by vacuum distillation. In the distillation process, hydrocarbon chains are broken and the molecules are recombined to form a new oil product which is then changed into an oil mist and then condensed into a liquid and the final qualified base oil. It can effectively remove wear residue, asphaltene, wax, impurities, moisture, acid value, carbon deposition, and oxides from the oil.
The equipment is suitable for refineries and small enterprises that need to process waste mineral lubricating oil. In the process of treatment, only a little waste residue and water are produced,And it mainly adopts light fuel oil burner or electriciyt to provide heat source for the equipment.
| Model Data | VBT-DB |
| Working capacity | 1-50 tons per day |
| Fuel consume | ≥5 kg/h |
| Total Power consume | ≥1*10^5 Kal/h |
| Fuel supply | Light diesel fuels/Kerosenen/Heavy fuel oil/Environmental oil/Waste lube oil for burning(Molten salt furnace available) |
| Heating Method | Natural gas/Gasoil/Coal/Power |
| power | 5-55KW (The electric power (pump, control system, valves, etc.) required to burn the burner) or 18-522KW (Power required for electric heating) |
| Electricity consumption (20H) | 360-10440 |
| The waste oil of 1400 PPM sulfur content can be distilled with a desulfurizing agent and a catalyst to obtain a waste oil of 100-150 ppm sulfur content. The original cetane number is 45, after distillation, you can get cetane number of 51~55. | |
Advantage:
1.Safety design, during the working process, raw materials oil is always flowing and flashing between the distillation tank and heating system, there is no any coking happen in the pipes and tanks, so the system is 100% safety, and long life time.
2.There are optional ways to heat the oil, like the burner by using fuel, natural gas or coal. or we can use the electric heating way.
3.By using the high vacuum distilling way, so the distilling temperature is low, energy saving and safety.
4.Using the special chemicals to catalyze the waste oil, which makes sure the final diesel oil, gasoline oil and base oil are good anti-oxidation with good color, there is no bad odor. The final oil can be storage for one year without color change and odor change.
Successful cases:
