12kw with 120A MPPT Solar Charger off Grid Inverter Low Frequency 120V/240V Split Phase Pure Sine Wave Power Inverter

Min.Order: 3
Product origin: Shenzhen, Guangdong, China
Infringement complaint: complaintComplaint
US$ 995

Description

12KW with 120A MPPT Solar Charger Off Grid Inverter Low Frequency 120V/240V Split Phase Pure Sine Wave Power Inverter

Main Features:
* 120/240 VAC Split Phase, Continuous 12000 Watt low frequency pure sine power inverter off grid solar inverter

* AC/Battery Priority: Our inverter is designed with AC priority by default, when AC input is present, the battery will be charged first, and the inverter will transfer the input AC to power the load. The inverter can be easily customized to Battery priority setting by LCD display, When you choose battery priority, the inverter will invert from battery despite the AC input.

* Five Stage Smart Charger, 60A battery AC charger max For lifep04,Sealed Gel AGM Flooded Lithium, Sealed, Gel, and Flooded Batteries

* High-definition LCD display, full-vision real-time monitoring data, Remote panel available charging current and charging voltage can be adjusted, customizable voltage for low voltage protection and voltage for low voltage recovery

* High transfer efficiency is above 90%,  complete isolate surge interference of input & output's voltage and current, Impact resistance, super load capacity, built-in AVR stabilizer, continuous stable pure sine wave output.





ModelGS1K-12-40AGS1K-24-40AGS1K-48-40AGS2K-12-40AGS2K-24-40AGS2K-48-40AGS3K-12-40AGS3K-24-40AGS3K-48-40A
AC  InputNominal Power1000W1000W1000W2000W2000W2000W3000W3000W3000W
Input Voltage Waveformsinusoidal (utility or generator)
Nominal input Voltage230V
Low Line  Disconnect184V-263V±4%(Normal)
135V-270V±4%(Wide)
Max AC input VoltageMax 270V
Frequency50Hz:41-54Hz, 60Hz:51-64Hz
AC  OutputPower Factor0.9~1.0
Nominal Output Voltage (V)208V/220V/230V/240V
Nominal Output Frequency (Hz)50Hz ± 0.3Hz, 60Hz ± 0.3Hz
Output Voltage Requlation±10% rms
Solar
charger
Rated Charge Current40A40A40A60A60A60A60A60A60A
PV Input Voltage range15V-40V for 12V, 25V-75V for 24V, 55-145V for 48V
Max.PV open circuit array voltage12V for 40V, 24V for 75V, 48V for 145V
Charger  modeMPPT
PV Low Voltage Re-connectPVBat.V+3V
PV Low Voltage DisconnectPV<=Bat.V
Efficiency97%
AC  ChargerNominal Charger Current20A/35A/50A/70A/90A( 5 stages adjustable charging current)
Over charge Protection Bat.V15.5VDC for 12V battery,Bat.V31.0VDC for 24V battery,Bat.V62.0VDC for 48V battery, beeps 0.5s every 1s & fault after 60s
EfficiencyEfficiency(Battery Mode)87%
Efficiency (Line Mode)>98%
Battery  VoltageNominal DC input Voltage12V24V48V12V24V48V12V24V48V
Low Battery AlarmDefault setting:10.5VDC±0.3VDC  for 12VDC, can be adjusted by LCD display
Default setting:21VDC±0.6VDC  for  24VDC, can be adjusted by LCD display
Default setting:42VDC±1.2VDC  for  48VDC, can be adjusted by LCD display
Low DC input shut-downDefault setting:10VDC±0.3VDC  for  12VDC, can be adjusted by LCD display
Default setting:20VDC±0.6VDC  for  24VDC, can be adjusted by LCD display
Default setting:40VDC±1.2VDC  for  48VDC, can be adjusted by LCD display
High DC input Alarm & FaultDefault setting:16VDC±0.3VDC  for  12VDC, can be adjusted by LCD display
Default setting:32VDC±0.6VDC  for  24VDC, can be adjusted by LCD display
Default setting:64VDC±1.2VDC  for  48VDC, can be adjusted by LCD display
Transfer TimeAC to DC20ms (max)
DC to AC15ms (max)
System ParameterOver-Load Protection110%<load<150%, beeps 0.5s every 1s, and Fault after 60s off
the output,load
>150%, beeps 0.5s every 1s, and Fault after 20s
Output Short Circuit ProtectionCurrent limit (Fault after 10s)
Surge Rating(10s)1:3(VA)
Power SaverLoad25W (Enabled on "P/S auto"Setting of Remote control)
ProtectionsLow battery, over charging, over load, over temperature
IndicatorsLED+LCD  Display
General
Specifications

 
Operating Temperature Range-10ºC~50ºC
Storage Temperature-15ºC~60ºC
Operation humidity5% to 95% (non-condensing)
Audible Noise60dB max
coolingForced air, variable speed fan
Dimension(L*W*H)480*336*190mm
Net Weight(kg)19.50kg19.50kg19.50kg23.50kg23.50kg23.50kg30.00kg30.00kg30.00kg
 
ModelGS4K-24-60AGS4K-48-60AGS5K-24-60AGS5K-48-60AGS6K-24-60AGS6K-48-60A
AC  InputNominal Power4000W4000W5000W5000W6000W6000W
Input Voltage Waveformsinusoidal (utility or generator)
Nominal input Voltage230V
Low Line  Disconnect184V-263V±4%(Normal)
135V-270V±4%(Wide)
Max AC input VoltageMax 270V
Frequency50Hz:41-54Hz, 60Hz:51-64Hz
AC  OutputPower Factor0.9~1.0
Nominal Output Voltage (V)208V/220V/230V/240V
Nominal Output Frequency (Hz)50Hz ± 0.3Hz, 60Hz ± 0.3Hz
Output Voltage Requlation±10% rms
Solar
charger
Rated Charge Current60A60A60A60A60A60A
PV Input Voltage range25V-75V for 24V, 55-145V for 48V
Max.PV open circuit array voltage24V for 75V, 48V for 145V
Charger  modeMPPT
PV Low Voltage Re-connectPVBat.V+3V
PV Low Voltage DisconnectPV<=Bat.V
Efficiency97%
AC  ChargerNominal Charger Current20A/35A/50A/70A/90A( 5 stages adjustable charging current)
Over charge ProtectionBat.V31.0VDC for 24V battery,Bat.V62.0VDC for 48V battery, beeps 0.5s every 1s & fault after 60s
EfficiencyEfficiency(Battery Mode)87%
Efficiency (Line Mode)>98%
Battery  VoltageNominal DC input Voltage24V48V24V48V24V48V
Low Battery AlarmDefault setting:21VDC±0.6VDC  for  24VDC, can be adjusted by LCD display
Default setting:42VDC±1.2VDC  for  48VDC, can be adjusted by LCD display
Low DC input shut-downDefault setting:20VDC±0.6VDC  for  24VDC, can be adjusted by LCD display
Default setting:40VDC±1.2VDC  for  48VDC, can be adjusted by LCD display
High DC input Alarm & FaultDefault setting:32VDC±0.6VDC  for  24VDC, can be adjusted by LCD display
Default setting:64VDC±1.2VDC  for  48VDC, can be adjusted by LCD display
Transfer TimeAC to DC20ms (max)
DC to AC15ms (max)
System ParameterOver-Load Protection110%<load<150%, beeps 0.5s every 1s, and Fault after 60s off
the output, load
>150%, beeps 0.5s every 1s, and Fault after 20s
Output Short Circuit ProtectionCurrent limit (Fault after 10s)
Surge Rating(10s)1:3(VA)
Power SaverLoad25W (Enabled on "P/S auto"Setting of Remote control)
ProtectionsLow battery, over charging, over load, over temperature
IndicatorsLED+LCD  Display
General
Specifications

 
Operating Temperature Range-10ºC~50ºC
Storage Temperature-15ºC~60ºC
Operation humidity5% to 95% (non-condensing)
Audible Noise60dB max
coolingForced air, variable speed fan
Dimension(L*W*H)530*400*190mm
Net Weight(kg)30.00kg30.00kg35.50kg35.50kg39.00kg39.00kg
 
ModelGS8K-48-120AGS10K-48-120AGS12K-48-120A
AC  InputNominal Power8000W10000W12000W
Input Voltage Waveformsinusoidal (utility or generator)
Nominal input Voltage230V
Low Line  Disconnect184V-263V±4%(Normal)
135V-270V±4%(Wide)
Max AC input VoltageMax 270V
Frequency50Hz:41-54Hz, 60Hz:51-64Hz
AC  OutputPower Factor0.9~1.0
Nominal Output Voltage (V)208V/220V/230V/240V
Nominal Output Frequency (Hz)50Hz ± 0.3Hz, 60Hz ± 0.3Hz
Output Voltage Requlation±10% rms
Solar
charger
Rated Charge Current120A120A120A
PV Input Voltage range55-145V for 48V
Max.PV open circuit array voltage145V
Charger  modeMPPT
PV Low Voltage Re-connectPVBat.V+3V
PV Low Voltage DisconnectPV<=Bat.V
Efficiency97%
AC  ChargerNominal Charger Current80A( 5 stages adjustable charging current)
Over charge ProtectionBat.V62V, beeps 0.5s every 1s & fault after 60s
EfficiencyEfficiency(Battery Mode)87%
Efficiency (Line Mode)>98%
Battery  VoltageNominal DC input Voltage48V48V48V
Low Battery AlarmDefault setting:42VDC±1.2VDC  for  48VDC, can be adjusted by LCD display
Low DC input shut-downDefault setting:40VDC±1.2VDC  for  48VDC, can be adjusted by LCD display
High DC input Alarm & FaultDefault setting:64VDC±1.2VDC  for  48VDC, can be adjusted by LCD display
Transfer TimeAC to DC20ms (max)
DC to AC15ms (max)
System ParameterOver-Load Protection110%<load<150%, beeps 0.5s every 1s, and Fault after 60s off
the output, load
>150%, beeps 0.5s every 1s, and Fault after 20s
Output Short Circuit ProtectionCurrent limit (Fault after 10s)
Surge Rating(10s)1:3(VA)
Power SaverLoad25W (Enabled on "P/S auto"Setting of Remote control)
ProtectionsLow battery, over charging, over load, over temperature
IndicatorsLED+LCD  Display
General
Specifications

 
Operating Temperature Range-10ºC~50ºC
Storage Temperature-15ºC~60ºC
Operation humidity5% to 95% (non-condensing)
Audible Noise60dB max
coolingForced air, variable speed fan
Dimension(L*W*H)645*450*225mm
Net Weight(kg)57.00kg63.50kg69.50kg

Company Profile:
Shenzhen ZLPOWER Electronics Co., Ltd. was established in 2007. We are national high-tech enterprise which professional in researching, manufacturing and exporting of UPS, power inverters and hybrid solar inverters. Our power capacity range from 400VA to 400KVA parallel series, which can satisfy different requirements of customers. We have passed ISO9001, ISO14001,CE, ETL, etc.

After several years' accumulation and development, ZLPOWER has a excellent researching and management team and many advanced production testing equipments, which ensures our products stability and innovation and got successful achievements in some fields. 

Our products are mainly exported to Europe, Africa, Middle East, Asia, North and South America. They're widely used in finance, communication, medical treatment, industry, public security, civil power solutions.


Related products:
https://zlpower.en.made-in-china.com/product-list-1.html
Product Tag:
Related categories:
Scroll to Top