Complaint
GB/T14201-2018, ISO 4700-2015
This pellet press is a test equipment used to determine the strength of pellets and sinters, controlled by servo system. Conforms to GB/T14201-2018 "Determination of the compressive strength of iron pellets for blast furnace and direct reduction", ISO 4700.
The pellet crushing device adopts a servo control system, which can maintain the set constant speed during the entire test period, so that the test data is more accurate and accurate, better ensurance for sample qualification rate and reproducibility. The servo control system can be used continuously and efficiently for a long time with good stability.
When any of the following conditions are met, the test ends, and the maximum load compressive strength value is obtained:(a) The load drops to 50% of the recorded maximum load value, or appears to be higher than the recorded maximum load; (b) The distance between the press plates drops to 50% of the initial average particle size of the sample.
Electric magnetic vibrating plate automatic feeding device, pellet crushing and automatic feeding are performed synchronously, saving test time;
Rotary automatic cleaning device, without manual cleaning, automatically completes the cleaning of waste pellets;
During the test, the test data is displayed in real time, specifically including: each pellet crushing force value, maximum value, minimum value, average value, relative frequency distribution, pressure curve graph;
Long-term storage of test data, historical test data can be inquired in different ways, test reports printable;
Equipped with pressure overload protection system to prevent damage to the sensor due to misoperation;
| Servo control Press for Ore Pellets and sinter Standards: GB/T14201-2018, ISO 4700-2015 This pellet press is a test equipment used to determine the strength of pellets and sinters, controlled by servo system. Conforms to GB/T14201-2018 "Determination of the compressive strength of iron pellets for blast furnace and direct reduction", ISO 4700. Features The pellet crushing device adopts a servo control system, which can maintain the set constant speed during the entire test period, so that the test data is more accurate and accurate, better ensurance for sample qualification rate and reproducibility. The servo control system can be used continuously and efficiently for a long time with good stability. When any of the following conditions are met, the test ends, and the maximum load compressive strength value is obtained:(a) The load drops to 50% of the recorded maximum load value, or appears to be higher than the recorded maximum load; (b) The distance between the press plates drops to 50% of the initial average particle size of the sample. Electric magnetic vibrating plate automatic feeding device, pellet crushing and automatic feeding are performed synchronously, saving test time; Rotary automatic cleaning device, without manual cleaning, automatically completes the cleaning of waste pellets; During the test, the test data is displayed in real time, specifically including: each pellet crushing force value, maximum value, minimum value, average value, relative frequency distribution, pressure curve graph; Long-term storage of test data, historical test data can be inquired in different ways, test reports printable; Equipped with pressure overload protection system to prevent damage to the sensor due to misoperation; Specifications | |
| Applications | Crush the pellets, test pellet strength |
| Application field | Iron and Steel Metallurgy, Pellet Mining, University/Research Institute, Entry-Exit Inspection and Quarantine Bureau |
| Test efficiency | According to the national standard, the speed of 60 pellets takes about 30 minutes |
| Maximum number of pellets in a single test | 120 pieces |
| Platen speed when the pellet is crushed | 10-20mm/min adjustable, meeting the national standard recommended requirements 15mm/min±1mm/min |
| Pellet size | Φ10mm~16mm, can also be customized according to the actual requirements of customers. |
| Sensor maximum pressure | 10KN or 15KN (about ≥1019.7kgf), can also be customized according to the actual requirements of customers. |
| Sensor accuracy | C3 (not less than 0.03%) |
| Comprehensive sensor error | ≤±0.020%FS |
| Transmitter accuracy | Better than 0.1%F·S |
| Transmitter protection level | IP65 |
| Working voltage | AC 220V±5%, 50Hz |
| Servo motor power | 0.75KW (ball crushing device) |
| 0.75KW (Sample delivery device for removing waste materials) | |
| Machine weight | About 120kg |
| Operation environment | Recommended use status: ambient temperature 1~40ºC; if the ambient temperature is below zero or plateau area, please inform the manufacturer in advance. |
| Applications | Crush the pellets, test pellet strength |
| Application field | Iron and Steel Metallurgy, Pellet Mining, University/Research Institute, Entry-Exit Inspection and Quarantine Bureau |
| Test efficiency | According to the national standard, the speed of 60 pellets takes about 30 minutes |
| Maximum number of pellets in a single test | 120 pieces |
| Platen speed when the pellet is crushed | 10-20mm/min adjustable, meeting the national standard recommended requirements 15mm/min±1mm/min |
| Pellet size | Φ10mm~16mm, can also be customized according to the actual requirements of customers. |
| Sensor maximum pressure | 10KN or 15KN (about ≥1019.7kgf), can also be customized according to the actual requirements of customers. |
| Sensor accuracy | C3 (not less than 0.03%) |
| Comprehensive sensor error | ≤±0.020%FS |
| Transmitter accuracy | Better than 0.1%F·S |
| Transmitter protection level | IP65 |
| Working voltage | AC 220V±5%, 50Hz |
| Servo motor power | 0.75KW (ball crushing device) |
| 0.75KW (Sample delivery device for removing waste materials) | |
| Machine weight | About 120kg |
| Operation environment | Recommended use status: ambient temperature 1~40ºC; if the ambient temperature is below zero or plateau area, please inform the manufacturer in advance. |
laboratory pulverizer grinding mill
hydraulic press for XRF sample preparation
Jaw crusher
