Complaint
| Item | Parameters | REMARK |
| LASER SYSTEM | LASER TYPE:Xenon lamp LASER | |
| MODEL:CLY-823LS | ||
| Wavelength: 1064nm IR/GR (wavelength optional) | ||
| Pulse width: 8ns | ||
| Frequency: 1-30Hz | ||
| Maximum energy output: 80mj | ||
| Output parameter stability: ± 3% | ||
| Spot size: square/adjustable in length | ||
| Minimum spot: 2.5um * 2.5um (optional under 50x objective state) | ||
| Spot size adjustment range: 50X MAX-24um * 24um Min-2.5um * 2.5um (optional) 20X MAX-60um*60um MAX-3um*3um | ||
| Imaging system | model:CLY-823LS | |
| Imaging lens: IR/GR antireflective film | ||
| Objective lens: 10X (APO), 50X (NIR) | ||
| Objective switching: manual | ||
| CCD brand: Sony, Japan | ||
| CCD pixel: 2 million image capture | ||
| Display: 17 inch 1920 * 1080 | ||
software systems | Control function: 1. Laser energy, frequency, wavelength switching, spot size adjustment and storage 2. Workbench movement and processing status parameter display | |
| Rack structure | Material: Sheet metal steel frame | |
| External dimensions: L1800mm * W1200mm * H1500mm | ||
| Workbench size: 1100mm * 1500mm | ||
| XY axis stroke: 1200mm * 720mm | ||
| Z-axis stroke: 100mm | ||
| XYZ axis movement speed: High speed ≥ 10mm/s Low speed: 2mm/s Manual fine adjustment: 0.25mm/260 degrees | ||
| XYZ axis movement accuracy: ± 0.02mm | ||
| Platform surface: padded with high-strength glass | ||
| Z-axis guide rail: oil-free guide rail | ||
| Appearance paint coloring: gray with glossy oil (dust-free type) | ||
| Suspension beam structure: marble structure | ||
| Display holder: adjustable for front and rear swing | ||
| Electrical part | Operating keyboard functions: 1. Shift between fast and slow 3 gears 2. XYZ axis coarse adjustment and fine adjustment 3. Illumination light source brightness adjustment 4. Start power switch 5. Start button 6. Laser energy compensation knob 7. Emergency stop | |
| Input power supply: single-phase AC 220V 50-60Hz 10A | ||
| Application Principles | Use high-energy pulse laser to cut or fuse specific circuits in the ito conductive coating of OLED/LED/LCD, repairing the normal function of OLED/LED/LCD circuits. | |
| Application | 1. Fusion welding at the break of the circuit outside the box of the COP structure flexible screen. 2. External corrosion ITO circuit cutting and fusion of OLED screens (including COG and COF). 3. ITO circuit disconnection and fusion of TFT screen 4. ITO: Indium TinOxide, OLED/LED/LCD conductive circuit 5.COP: Chip On PI; Sheet on PI material. PI material is a flexible substrate. For example, 12Pro max, 13,13Pro, Samsung flexible screen, etc COF: Chip On Flex; The chip is on the ribbon. For example, i-Phonemax, 11pro max, 12,12Pro, and Samsung S6, S7, A51, A70, etc |
