Complaint
| technical specification | CH3000-GP25LWF |
| Maximum laser power | 3000W |
| Optical maser wavelength | 1080nm±5nm |
| Fiber output quantity | Route 1 |
| Fiber length | 15M |
| Depth of field | 6mm stainless steel |
| 5mm aluminium alloy | |
| Voltage input | AC380V+10%/3P+PE |
| Overall power | 21.5KW |
| Type of cooling | Water cooling |
| Optical fiber type | QBH |
| Fiber diameter | 50um |
| Radius of motion | 1730mm |
| Automatic wire feed | 0.8-1.6mm stainless steel/aluminium alloy |
| orientation range | 55mm |
| serial number | category | details |
| 1 | depth of fusion | Strong penetration, large depth to width ratio |
| 2 | weld width | Narrower than argon arc welding, the beam is about 0.4mm. It can reach 0-5mm after swinging |
| 3 | deformation | The heat affected zone is small and the deformation of full welding is minimal |
| 4 | surface effect | The heat affected zone is small and the deformation of full welding is minimal |
| 5 | welding quality | High quality, can reduce the optimized base material impurities The tensile strength is 1.2 times that of the base material, and the brittleness is improved |
| 6 | welding surroundings | Less smoke, less welding slag |
| 7 | welding speed | Fast speed, normal use speed of 20- 40 mm/s |
