Multi-Seal is a universal grade, general purpose all-weather adhesive sealant based on polymer
sealant. Combines the properties of both silicone and the polyurethane that makes it an optimum
choice for a variety of substrates including: Aluminum, Granite, Ceramics, Marble, Porcelain, Metals,
PVC,Glass, Wood, Porous Surfaces (Concrete, Brick, Limestone, etc.).
FEATURES & BENEFITS
Does not contain solvent, silicone or isocyanate,Very Low VOC content,No bubble formation, even in
wet and humid conditions,Very good UV resistance Over-paintable with water based paints, No
shrinkage, Does not cause oil stains in panels and porous material, Non-sag, very easy to apply, No
surface tackiness.
APPLICATION AREAS
Sealing and Bonding applications in;
Window and Door Perimeter;
General sealing and waterproofing;
Roofing and gutter;
Concrete joints.
Metal building construction
INSTRUCTIONS
Ensure that the surfaces to be sealed are clean, dry and free from grease.
A preliminary compatibility test is recommended.
The application temperature must be between + 5 ° C and +40 ° C.
Dimensions of the joint:
Minimum width X Minimum depth: 5mm X 5 mm
Recommendation: width = 2 x depth
The joint must be smoothed with spatula within 5 minutes of application to ensure good contact
between the sealant and the substrate.
The adhesive tape must be used where precise lines of joints or clean lines are required. Remove the
tape immediately after applying the product.
An excess of sealant can be removed from tools and surfaces before it cures, using solvent. Once
hardened, the material can be removed mechanically
Complaint
