Official Quality Certification Guaranteed Electrical Forklift Parts DC Contactor Spi-Sw80-2366

Min.Order: 10

Product origin: Hefei, Anhui, China

Infringement complaint:

Complaint

US$ 30 ~ 40

Description

SPI-SW80 High Quality 36V 100A Electrical DC Contactor For Forklift Electric Vehicle Parts

SW80 Technical Information

Application	Interrupted Uninterrupted
Thermal Current Rating	100A	125A
Intermittent Current Rating:
30% Duty	185A	230A
40% Duty	160A	200A
50% Duty	140A	175A
60% Duty	130A	160A
70% Duty	120A	150A
Rated Fault Current Breaking Capacity (Icn) 5ms Time Constant:(In accordance with UL583)*
Blowouts	600A at 96V D.C.
No Blowouts	600A at 48V D.C.
Rated Fault Current Breaking Capacity (Icn) Resistive Load:(In accordance with UL508)*
Blowouts	190A at 96V D.C.
No Blowouts	190A at 60V D.C.
Maximum Recommended Contact Voltages
Blowouts	96V	96V
No Blowouts	48V	60V
Typical Voltage Drop per pole across New Contacts at 100A	40mV

Mechanical Durability	> 5,000,000 Cycles
Coil Voltage Available (Us) (Rectifier board required for A.C.)	6 - 240V

The SW80 features single pole double breaking main contacts with silver alloy tips, which are weld resistant, hard wearing and have excellent conductivity. The SW80 has M8 stud main terminals and 6.3mm spade coil connections. Mounting is via M4 tapped holes or mounting brackets, either supplied fitted, or as separate items. Mounting can be horizontal or vertical, when vertical the M8 contact studs should point upwards. If the requirement is for downwards orientation we can adjust the contactor to compensate for this.

Q1.Can I have a sample order?
A: Yes, we welcome sample order to test and check quality.

Q2. Do you have any MOQ limit?
A: Small quantity is accepted , but we offer quantity discount.

Q3. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.

Q4. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q5. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.

Q6. Is it OK to print my logo on the product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.

Q7. How to proceed an order?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production and Shipping.

Forward

Related products