Product Introduction
high-voltage cable outer sheath fault detector is 10KV and below, which fully meets the Chinese national standard GB50150-2006 cable outer sheath withstand voltage test regulations, including the cable outer sheath handover test and preventive test suitable for cross-interconnect systems And the fault location of the outer sheath of the cable.
Quickly and accurately find hidden dangers of 10kv-500kv single-core and three-core high-voltage and ultra-high voltage cable outer sheath grounding faults and large leakage currents.
At the same time, it can perform 5kv-10kv on high-density polyethylene and polyvinyl chloride cable outer sheaths, the minute DC withstand voltage test is a special instrument necessary for the maintenance of cable equipment of 10kv-500kv single-core and three-core high-voltage and ultra-high voltage cable operation units, ultra-high voltage cable engineering companies, and various power transmission and transformation engineering companies.
Technical data
Power: | 220V(1±10%),50Hz(1±5%) |
Output voltage: | 0~10kV(Square wave) |
Output current: | max 200mA |
Output capacity: | 2kVA |
Frequency adjust: | Min:0.4Hz,Max:1Hz(range adjustable) |
Main features
1.Voltage adjustable.
2.Frequency adjustable.
3.Over current protection.
4.Pin-pointing and withstand testing switched by one button , the receiver sensitivity can be adjust.
5.Signal frequency adjustable, and zero protection.
6.The test range without blind area
7.The receiver sensitivity is adjustable
8.Signal frequency is adjustable
Complaint
