Factory Oca Mode Switching Membrane for Ultra-Light Pet Release Film 125u 3-6g

Min.Order: 3,000

Product origin: Shenzhen, Guangdong, China

Infringement complaint:

Complaint

US$ 0.14 ~ 4.7

Description

Product composition
This release film is made of optical-grade PET (polyester film) as the base material and coated with silicone oil on one side for anti-static treatment on the back, with a surface resistivity of 10 ^ 6~10 ^ 10 Ω. m.
Product characteristics
1. The release stability is good, the release force fluctuation is small, and it is easy to peel after long-term use;
2. High cleanliness for production and processing in a thousand-class purification environment;
3. The surface resistivity reaches 10 ^ 6~10 ^ 10 Ω. m, with stable anti-static interference effect;
4. The appearance is free of scratches, good flatness, coating lines, wrinkles, dirt and crystal spots;
5. High residual adhesion rate (≥ 90%), little silicon transfer, no impact on the performance of the bonding material, no pollution;
Product specification
1. Width: 1060mm (can be customized according to customer requirements)
2. Length: 200-3000m (slitting and rewinding according to customer requirements)
3. Inner diameter of coil core (paper tube or plastic tube): 3 inches (76.2 mm) or 6 inches (152.4 mm)
Scope of application
Special anti-static ionization film for OCA optical adhesive coating (suitable for thermal curing and UV curing process, etc.)
According to the 1/3 difference design, thickness difference design and anti-static requirements of the release film on both sides of the OCA optical adhesive, this R704TE -- 75um transparent PET anti-static release film 10-20g/in is its light release layer, and the heavy release layer used with it is our R907TE -- 100um transparent PET anti-static release film 40-50g/in.

Product:	Optical release film
Thickness:	75um
Length:	Customized~3000m
Width:	Customized

Product packaging
1. Products are generally packed in cartons and wooden pallets
2. Each box of products has a shipping label, and each pallet has a product list
3. It can also be packaged according to the customer agreement
instructions
1. Static electricity may be generated during unwinding or rewinding during use. The electrostatic layer will damage the release layer and lead to poor peeling. If necessary, anti-static treatment can be carried out on the back or static elimination equipment can be used to eliminate static electricity.
2. In order to obtain the best use effect, it is recommended to use this product within 6 months from the purchase date;
3. It must be retested before use after expiration;
4. Recommended storage conditions: avoid direct sunlight, store under the indoor ambient temperature of 25 ºC ± 2 ºC and humidity of 60% ± 10%.
5. When using this product, please fully study whether the purpose (purpose, condition) is suitable or not in advance, and decide whether the product conforms to its standard by yourself. The content beyond the specification cannot be guaranteed.

Forward

Related products