100mesh Pan Carbon Fiber Powder for PLA 3D Printing

Min.Order: 1

Product origin: Shenzhen, Guangdong, China

Infringement complaint:

Complaint

US$ 17 ~ 18

Description

100mesh Pan Carbon Fiber Powder for PLA 3D Printing

100 mesh milled carbon fiber powder was made from high modulus high strength carbon fiber chopped strands,after grinding,microscopic separating,screening,high temperature drying.It retains many of the excellent performance of carbon fiber,small particle size,clean surface,large surface area,dispersed uniformly with resin,is excellent reinforcing filler of composite products.It can be compound with resin,plastic,rubber and other materials to increase its strength and wear resistance.Widely used in many fields,shuch as conductive plate,conductive flooring,electrical machinery,anti-static industry,defense industry,building insulation,friction materials and chemical.

SPECIFICATIONS:

Model:	XGT7-100
Density:	1.76g/cm3
Carbon content:	>99%
Diameter (μm):	7.0
Mesh:	100
Aspect ratio:	21.4:1
Average Fiber length(μm):	150
Tensile strength(MPa):	4300-4900
Young's modulus(GPa):	220-235
Resistivity micron ohm meter:	14

APPLICATION FIELDS:

1.Reinforce rubber,modify plastics and resin: Polypropylene (PP),nylon (PA),polycarbonate resin (PC),PF,polytetrafluoroethylene resin (PTFE),polyimide resins (PI ),epoxy resin, silicone rubber, polyvinyl alcohol, unsaturated polyester resin;

2.Construction industry: carbon fiber reinforced cement,conductive coatings,anti-static floors;
3.Shielding materials: Manufacturing shield smoke,shielding curtain wall;
4.Insulation materials: carbon fiber reinforced preform and refractory bricks,carbon-fiber reinforced ceramic,etc;
5.New energy: used as conductive additives of positive or negative materials in nickel hydride and nickel battery;
6.Anti-static industry: coating,flooring,paint,ink,anti-static filter,
7.Aerospace: composite materials for parts of aircraft and satellite.
8.Civilian areas: sports equipment transportation,sanitary equipment,kitchen appliances.

STORAGE:

The milled carbon fiber should be keep dry in their original bags and stored in a suitable place,preferably at room temperature with 35-65% relative humidity.Avoid the sun, rain and fire.

PACKAGING:

PRODUCT DETAIL IMAGES:

SGS TEST REPORT:

CERTIFICATE ORIGIN:

Forward

Related products