Description
Low price deformed rebars reinforced black steel bars/concrete building screw thread reinforcing iron
Reinforcing steel is a construction process used as a tension device to support concrete and masonry. Reinforcing steel, otherwise known as Rebar, requires skillful bending and binding of steel rebars which are arranged in a variety of patterns to optimise bonding with the concrete. Steel Rebar is often used because steel has a much higher tensile strength than concrete and masonry, it therefore strengthens and holds the components together, creating an augmented structure. Reinforcing steel is different to structural steel - which is the kind of steel you'd imagine for a steel framed building. Structural steel has far more regulations associated with it, as it can be used for a number of purposes including steel columns, beams, plates and braces.ASTM | A615/A615M/Gr60 |
Steel grade | HRB400, HRB500, HRB400E, HRB500E |
JIS | SD295/SD340/SD390 |
Section Shape | Spiral Shape,Herringbone Shap,Crescent Shape |
Dimensions | 6/8/10/12/15/16/18/20/22/...Customer requirements |
Length | 2000-12000mm,or as required |
Standard | ASTM,AISI,JIS,GB, DIN,EN |
Surface treatment | Black/Peeling/Polishing/Machined |
Technique | Cold/Hot rolled, Cold-Drawn, or Hot Forged |
Heat Treatment | Annealed; Quenched; Tempered |
price terms | FOB,CRF,CIF,EXW all acceptable |
Loading port | any port in China |
Packing | standard export packing (inside:water proof paper,outside:steel covered with strips and pallets) |
Shape | Straight, coil |
U.S. rebar size chartImperial | Metric bar | Linear Mass Density | Nominal diameter | Nominal area |
bar size | size (soft) | lb⁄ft | kg⁄m | (in) | (mm) | (in²) | (mm²) |
#2 | No.6 | 0.167 | 0.249 | 0.250 = 2⁄8 = 1⁄4 | 6.35 | 0.05 | 32 |
#3 | No.10 | 0.376 | 0.56 | 0.375 = 3⁄8 | 9.53 | 0.11 | 71 |
#4 | No.13 | 0.668 | 0.994 | 0.500 = 4⁄8 = 1⁄2 | 12.7 | 0.2 | 129 |
#5 | No.16 | 1.043 | 1.552 | 0.625 = 5⁄8 | 15.9 | 0.31 | 200 |
#6 | No.19 | 1.502 | 2.235 | 0.750 = 6⁄8 = 3⁄4 | 19.1 | 0.44 | 284 |
#7 | No.22 | 2.044 | 3.042 | 0.875 = 7⁄8 | 22.2 | 0.6 | 387 |
#8 | No.25 | 2.67 | 3.973 | 1.000 = 8⁄8 | 25.4 | 0.79 | 510 |
#9 | No.29 | 3.4 | 5.06 | 1.128 ≈ 9⁄8 | 28.7 | 1 | 645 |
#10 | No.32 | 4.303 | 6.404 | 1.270 ≈ 10⁄8 | 32.3 | 1.27 | 819 |
#11 | No.36 | 5.313 | 7.907 | 1.410 ≈ 11⁄8 | 35.8 | 1.56 | 1,006 |
#14 | No.43 | 7.65 | 11.384 | 1.693 ≈ 14⁄8 | 43 | 2.25 | 1,452 |
#18 | No.57 | 13.6 | 20.239 | 2.257 ≈ 18⁄8 | 57.3 | 4 | 2,581 |
Canadian sizes
Metric | Linear Mass Density | Nominal diameter | Cross-sectional |
bar size | (kg/m) | (mm) | Area (mm²) |
10M | 0.785 | 11.3 | 100 |
15M | 1.57 | 16 | 200 |
20M | 2.355 | 19.5 | 300 |
25M | 3.925 | 25.2 | 500 |
30M | 5.495 | 29.9 | 700 |
35M | 7.85 | 35.7 | 1000 |
45M | 11.775 | 43.7 | 1500 |
55M | 19.625 | 56.4 | 2500 |
European sizesMetric | Linear mass | Nominal | Cross-sectional |
bar size | density (kg/m) | diameter (mm) | area (mm²) |
6,0 | 0.222 | 6 | 28.3 |
8,0 | 0.395 | 8 | 50.3 |
10,0 | 0.617 | 10 | 78.5 |
12,0 | 0.888 | 12 | 113 |
14,0 | 1.21 | 14 | 154 |
16,0 | 1.58 | 16 | 201 |
20,0 | 2.47 | 20 | 314 |
25,0 | 3.85 | 25 | 491 |
28,0 | 4.83 | 28 | 616 |
32,0 | 6.31 | 32 | 804 |
40,0 | 9.86 | 40 | 1257 |
50,0 | 15.4 | 50 | 1963 |
Deformed Steel Bar is the surface ribbed reinforcement, also known as ribbed reinforcement, usually with two longitudinal ribs and transverse ,ribs evenly distributed along the length direction. The shape of transverse rib is spiral, herringbone and crescent. The production process is as follows: Walking beam heating furnace → roughing mill → intermediate mill → finishing mill → water cooling device → cooling bed → cold shear → automatic counting device → baler → unloading bench.
Our Factory
Product Application
Rebar is widely used in civil engineering construction such as houses, bridges and roads. From public facilities such as
expressways, railways, bridges, culverts, tunnels and flood control dams to the foundation, beams, columns, walls and plates of housing buildings, threaded steel is an indispensable structural material.
Packing&Delivery
Certifications
FAQ
1.Q: Can we visit your factory?
- A: Warmly welcome. Once we have your schedule, we will arrange the professional sales team to follow up your case.
2.Q: Can provide OEM/ODM service?
-A: Yes. Please feel free to contact us for more details discuss.
3.Q: How is your Payment Term?
-A:We prefer TT, L/C, Western Union, etc.
4.Q: Can you provide sample?
-A: Yes!we can send samples to all parts of the world, our samples are free, but customers need to bear the courier costs.
5.Q:Why choose our company ?
-A:(1)We are specialized in this industry for more than 20 years (2) We are full stock (3)we have ourselves processing factory
6.Q: What's the MOQ ?
-A: 1 Ton is OK.
7.Q: What's your delivery time ?
-A:Regular lead time is 15 to 30 days after receiving deposit