Complaint
| Product Description |
| ABS is a terpolymer of three monomers: acrylonitrileA), butadiene (B) and styrene (S). The relative content of the three monomers can be changed at will to make various resins. ABS plastic has the common properties of three components. A makes it resistant to chemical corrosion, heat resistance, and has a certain surface hardness, B makes it have high elasticity and toughness, and S makes it have the processing and molding characteristic of thermoplastics and improve electrical properties. performance. Therefore, ABS plastic is a kind of "tough, hard and rigid" material with easy-to-obtain raw materials, good comprehensive performance, low price and wide range of uses. Properties: 1.Stable shrinkage, good dimensional stability, low warpage 2.Good processability 3.Balance mechanical properties 4.Good exterior, no need to be plated, sprayed 5.Flame resistant |
| Properties | Test Method | Test Condition | Units | Typical Values |
| Physical | ||||
| Melt Flow Rate | ASTM D-1238 | 220ºC, 10Kg | g/10min | - |
| Specific Gravity | ASTM D-792 | 23ºC | g/cm3 | 1.19 |
| Ash | - | 800ºC,30min | % | - |
| Mechanical | ||||
| Tensile Strength | ASTM D-638 | 50mm/min | MPa | 55 |
| Flexural Strength | ASTM D-790 | 2mm/min | MPa | 70 |
| Flexural Modulus | ASTM D-790 | 2mm/min | MPa | 2300 |
| Impact Strength, IZOD notched | ASTM D-256 | 23ºC | KJ/m2 | 50 |
| Thermal | ||||
| Heat Deflection Temp. | ASTM D-648 | 1.8Mpa | ºC | 110 |
| Flammability | ||||
| Mold Shrinkage | ASTM D-955 | 23ºC | % | 0.4-0.7 |
| Flammability | UL94 | 1.6mm | V0 | |
1. Q:How can I get some samples?
5-15 KG Free Samples can be offered per your request. New clients are expected to pay for the courier cost, the samples are free and this charge will be deducted from the payment of order.
