Product Description |
Product Parameter |
Product name | reflective film embossing machine |
Effective width | 1200-1800mm |
Maximum rewinding and unwinding diameter | 600mm |
Retracting and unwinding mechanism | double shaft and double working station |
Coil core | inner diameter 76mm |
Stamping speed | 0.2-20m/min |
Maximum mechanical speed | 200m/min |
Tension control range | 3-25kgf |
Main drive motor | 2KW-3.0KW |
Winding drive motor | 2.2KW*6 class/magnetic powder brake |
Total installed capacity | 90KW Approximately 60KW in normal operation |
Working power supply | AC380V three-phase five wire |
Air source pressure | 0.7MPa |
Product Feature |
1. | With manual automatic correction device, and left and right limit device |
2. | The winding is a magnetic powder brake. The magnetic powder is equipped with an air cooling device. The discharging reel and the magnetic powder brake are driven by gears. |
3. | Preheating adopts heat conduction oil heating cycle roller control mode. |
4. | Bearings adopt imported NSK or SKF sealed bearings |
5. | Roller plate drive using frequency conversion motor system. |
6. | Roller rubber roller cover infrared resistant rubber |
7. | The cooling roll and traction roll are combined into one traction method. |
8. | Traction roller with 45# steel surface hard plating, mirror polishing treatment. |
Product Display |
Company Profile |
FAQ |