Thor Acticide Hf3 Equivalent Biocide

Min.Order: 100

Product origin: Quzhou, Zhejiang, China

Infringement complaint:

Complaint

US$ 2 ~ 5

Description

THOR ACTICIDE HF3 Equivalent

KSF-3 COMPOSITE PRESERVATIVES

Physical properties and quality indicators

Appearance: colorless to yellowish transparent liquid pH: 2 ~ 5

Active substance content: > 3% Density: 1.03~1.08 (20 C. G/cm3)

Product features

Low dosage, high efficiency, recognized high efficiency and low toxicity germicidal antiseptic. Broad-spectrum antibacterial, has strong ability to kill bacteria and fungi.
space protection in tanks, long-lasting antibacterial
The color is light and bright without affecting the color of the product. 4 Recommended dosage is non-toxic and non irritating.

Application scope

THOR ACTICIDE HF3 Equivalent has a broad spectrum of antibacterial properties, and can effectively inhibit the growth of bacteria and mold.

THOR ACTICIDE HF3 Equivalent is widely used in PH < 9, waterborne coatings, latex paint, genuine stone paint and building glue. It prevents the occurrence of spoilage in

the tank through space protectant, prevents the odor and pH value caused by microbial propagation during the use of emulsion and

coatings.

Bacteriostasis

Microbial name	Ec	Sa	Pa	Ab	Tr	Ab	Ca
Minimum inhibitory concentration (MIC) (ppm)	115	105	125	105	115	115	120

Instructions

The recommended dosage is 0.1 ~ 0.3%, which is usually used independently, and can also be used in combination with other preservatives.

PH range 2~9. When the product contains organic amine thiols and sulfite or strong reducing agent, it can reduce the germicidal efficacy.

Add below temperature (50 degrees Celsius). It is recommended to wear protective equipment when the raw liquor is operated, and rinse with plenty of water in case of contamination.

The amount of additions and the method of use in this note are the reference opinions provided by Ebright according to the experience of many years of professional application of preservatives.

When microbial contamination is caused by high temperature season or production conditions, the upper limit of additions can be increased to ensure the anticorrosion effect.