Complaint
Characteristics of compressor
1.The outlet of each stage of the compressor is equipped with an air-cooled cooler, a safety valve, an air-water separator, an activated carbon filter, and an automatic sewage system. All internal piping and connections are factory installed for easy on-site installation.
2.Advanced oil and gas separation and filtration system, including centrifugal separation and high-precision filter between compressor stages, regular automatic discharge can remove oil and water in the air between compression stages and ensure the normal operation of the compressor.
3.The compressors are equipped with pressure relief valves at all levels to provide all-round safety protection.
4.Automatic pressure relief and restart to ensure no-load start of the compressor;
5.An air filter is installed at the inlet, and a pressure maintenance valve is installed in front of the outlet, which opens automatically at about 10Mpa, so that the compressed air ensures that the enhanced filter filling pump has been filled with lubricating oil and has passed the operation test of the whole machine;
6.Advanced design of less oil-lubricated cylinder, the cylinder, valve and piston ring can run for a long time without failure;
7.Many components of the compressor are standardized to the greatest extent, reducing the inventory of spare parts for users;
8.The compressor is equipped with a breathing air filter, which adopts a triple filtration system composed of activated carbon, molecular sieve and carbon monoxide adsorbent to ensure that the filtered compressed air meets the EN12021 breathing air standard;
| Type | HYW-265 |
| Flow | 265L/min |
| Inlet pressure | 0.1MPa |
| Inlet temperature | 30°C |
| Work pressure | 22.5 MPa / 30MPa |
| Pressure relief valve set pressure | 25MPa / 33MPa |
| Final exhaust temperature (after after cooler) | Ambient temperature+15°C |
| Compression Stage | 3th-stage |
| Cylinder number | 3cylinders |
| Host speed | 1400 r/min |
| Compressed medium | Air |
| Drive mode | Belt |
| Cooling method | Air cooling |
| Lubrication method | Splash lubrication |
| Lubricating oil | Andrew 750 |
| Refueling amount | 1.5L |
| Control System | Automatic shutdown |
| Weight | ≈116KG |
| Dimension | ≈1050 x 502 x 620mm |
| Noise | ≤82 db |
| Exhaust vent | 2SETS |
| Outlet size | G 5/8 |
| Power | 5.1KW |
| Drive type | Gasoline engine honda GX270 |
| Name | Qty | Note |
| Compressor host | 1set | |
| Wind cooler | 1set | |
| Gasoline | 1set | |
| pressure controller | 1set | |
| Pressure relief valve | 4sets | |
| Automatic shutdown | 1set | |
| Active carbon filter | 1set | |
| Steam separator | 1set |
| S/N | Name | Qty | Note |
| 01 | Multifunctional high pressure inflation valve and inflation hose | 2 | |
| 02 | Open the filter bucket tool | 1 | |
| 03 | Air filter / final air filter | 1/1 | Factory installed on the device |
After Sales Service
1.Quick response within 2 to 8 hours, with a reaction rate exceeding 98%;
2. 24-hour telephone service, please feel free to contact us;
3. The whole machine is guaranteed for one year (excluding pipelines and human factors);
4. Provide consulting service for the service life of the whole machine, and provide 24-hour technical support via email;
5. On-site installation and commissioning by our experienced technicians;
If you want us to provide you with detailed technical design and quotation, please provide the following technical parameters, and we will reply to your email or phone within 24 hours.
1.Flow: _____ Nm3 / hour
2.Pressure: _____Bar(MPa)
3. How many cylinders to fill
4. Whether it needs to be filled every day
