Complaint
ELSKY High Configuration 120*120mm Nano-itx Motherboard NANO8U
with CPU processor Whiskey Lake 8th generation Core i7-8665U Quad core 1.9GHz
Specifications
Motherboard model | CPU | 4K | LAN | COM | USB2.0 | USB3.1 | SSD | Memory | Power |
NANO8U-UA
| Support Whiskey Lake 8th generation Core i3, i5, i7
| support
| 1 | 2 | 4 | 4
| 1*M.2 1*SATA 3.0 Optional MSATA
|
1*NB DDR4 32GB MAX
| 12/19V
|
2 | 2 | 2 | |||||||
NANO10U-UA
| Support Comet Lake 10th generation Core i3, i5, i7
| support
| 1 | 2 | 4 | 4
| |||
2 | 2 | 2 | |||||||
Single network default 8*USB available Dual network default 6*USB available | |||||||||
| Form Factor | 120mm(L)*120mm(W)*33mm(H) | ||
| CPU processor | NANO8U-UA | Support 8th generations of Whiskey Lake CPU: I3-8145U, I5-8265U, I7-8665U, etc. | |
| NANO10U-UA | Support 10th generation of Comet Lake CPU: I3-10110U, I5-10210U, I7-10510U, etc. | ||
| Memory support | 1*DDR4 SODIMM memory slot, support 2133/2400/2666MHz memory, low voltage 1.2V, maximum support 32GB | ||
| Power supply | 1*DC_IN | Support 12V/19V voltage, the inner diameter of DC head is 2.5MM full load power consumption of the motherboard is about 55W, it is recommended to use a power supply of 12V /7 A or 19V5A or above | |
| 1 * DC_ATX | |||
| DC_IN and DC_ATX are two choices, the motherboard supports DC_IN by default | |||
| Display function | Integrated UHD Graphics ultra-core graphics card, support single display, dual display/triple display copy, dual display/triple display expansion, single display under DOS | ||
| 1*HD_MI 1.4 interface | Support 4K resolution 4096/3840*2160@ 30Hz | ||
| 1*VGA DB15 interface | Support resolution 1920*1080@60HZ | ||
| 1*JVGA pin | Support resolution 1920*1080@60HZ (14Pin, 1*14Pin , 2.0mm) | ||
| 1*LVDS/EDP pin | Support resolution 1920*1080@60Hz (30Pin, 2*15Pin, 2.0mm) | ||
| 1* INVERT pin | LVDS backlight switch backlight brightness adjustment control (6Pin, 1*6Pin, 2.0mm) | ||
| 1*LVDS_PWR pin | LVDS/EDP working voltage control pin (6Pin, 2*3Pin, 2.0mm) | ||
| LVDS and EDP are two options, the default supports LVDS, can be change to EDP | |||
| Network features | 1*RJ45 LAN interface (Optional dual network ports) | Single or dual network Realtek 8111 H Gigabit LAN chip, support wake on LAN and PXE diskless boot function Optional Realtek 8106E Fast Ethernet chip | |
| 1*Mini-PCIE interface | Support WIFI/3G/4G/GPS,etc. optional support MSATA | ||
| Hard disk function | 1* M.2 interface | Default support M.2 2280, optional 2242; support NVME (PCIE) protocol and SATA protocol disk; | |
| 1*Mini-PCIE interface | Can be changed to support MSATA | ||
| 1*SATA1 interface | Standard SATA3.0 hard disk interface, max. transmission speed 6.0 Gbps | ||
| 1*SATA_PWR1 pin | Hard disk power supply pin, can take power 5V, 12V. (4Pin, 1*4Pin, 2.54mm) | ||
| Sound function | Integrated Cmedia HS_100B USB audio chip | ||
| 1*LIN_OUT interface | Support audio output (green) | ||
| 1*MIC_IN interface | Support microphone input (red) | ||
| 1*INT_SPK pin | Amplifier supports 8 ohm 5 watt speaker dual-channel output (4Pin, 1*4Pin, 2.0mm) | ||
| USB function | 4 * USB3.1 interface | Rear standard USB3.1 Gen2 interface, the maximum transmission bandwidth is 10.0Gbps | |
| 2*USB2.0 interface | Rear standard USB2.0 interface | ||
| 1 *F_USB 1 pin | Front USB2.0 pins, one set has 2*USB2.0 (9Pin, 2*5Pin, 2.0mm) | ||
| 1 *F_USB 2 pin | Front USB2.0 pins, one group has 2*USB2.0 default no pins (9Pin, 2*5Pin, 2.0mm ) | ||
| Switch function | 1*F_PANEL pin | Switch, power light, hard disk light, restart pin (9Pin, 2*5Pin, 2.0mm) | |
| 1*PWR_SW button | switch button | ||
| 1*AUTO_SW pin | Hardware control power-on pin (3Pin, 1*3Pin, 2.0mm) | ||
| Other I/O | 1*COM1 pin | Serial port, optional support RS232 /RS422 /RS485 (9Pin, 2*5Pin, 2.0mm) | |
| 1*COM2 pin | Serial port, only supports RS232 (9Pin, 2*5Pin, 2.0mm) | ||
| 1*JCOM1 pin | Control COM1 pin 9 voltage 0V/5V/12V optional (6Pin, 2*3Pin, 2.0mm) | ||
| 1*SIM_CARD slot | Support SIM card, SIM card is required when using 3G/4G | ||
| 1*CLR_CMOS pin | Motherboard reset and discharge pins (3Pin, 1*3Pin, 2.0mm) | ||
| 1*CPU_FAN pin | CPU fan pin, support temperature control (4Pin, 1*4Pin, 1.25mm) | ||
| 1*LED | Power and hard drive status indicators | ||
| 1*GPIO pin | Standard GPIO pins (10Pin, 2*5Pin, 2.0mm) | ||
| Operating environment | Working temperature: - 1 0ºC~60ºC; Working humidity: 5%~95% relative humidity, non-condensing | ||
| BIOS | AMI BIOS, support power-on, scheduled power-on, remote power-on and power-on device intelligent identification | ||
| Watch Dog | Watchdog programming, support hardware reset function (256 levels, 0~255 seconds) | ||
| Operating system | Support Win 11, Win 10 , Linux, etc. | ||
Packaging
Before delivery,we guarantee that every item will be tested and carefully packed with individual Anti-static bubble bag and separated by stiff cardboards in carton boxes.
1Piece/Carton(G.W. : 1.0-1.5KG);
5Pieces/Carton(G.W. : 5.0-7.5KG);
10Pieces/Carton(G.W. : 10.0-15.0KG);
Shipping
3 working days after received full payment(In stock).
Express:DHL,Fedex,UPS,TNT,etc.
Company Informaton
In the year of 2009,Shenzhen Elsky Technology Co.,Ltd. is specially engaged in the research,production and sales of all kinds of mini-ITX motherboard and mini PC for POS,ALL-IN-ONE PC,Digital signage,Advertising LCD Player,Network,Telecommunication and other industries.Meanwhile,we have OEM/ODM service for global customers.
As a motherboard and mini PC manufacturer, ELSKY concern with the design,development and production more than 10 years, We won the CCTV Securities Information Optimizing Brand and the members of Intel Intelligent Manufacturing in China and the member of Intel IoT Solutions Alliance.
