Complaint
One Step LH Test Strip/Cassette/Midstream is an in vitro diagnostic test device intended for the rapid determination of human Luteinzing Hormones ( LH ) in urine to predict when there is a LH surge, and in turn, when you are likely to ovulate. You can easily carry out yourself.
*** It is intended for over-the-counter (OTC) use. For in vitro diagnostic use only.
One Step LH Test : Strip/Cassette/Midstream | |
Name | LH Ovulation Test Kit |
Format | A. Strip |
B. Cassette | |
C. Midstream | |
Specimen | Urine |
Sensitivity (mIU/ml) | 25 mIU/ml |
Size(mm) | A.Strip:2.5mm, 3.0mm, 3.5mm, 4.0mm,5.0mm, 6.0mm |
B.Cassette: 4.0 mm | |
C.Midstream:4.0mm, 6.0mm | |
Packing, OEM service are also accepted | A. Strip:1 test/ pouch, 10000 tests / carton |
B. Cassette:1 test/ pouch, 3000 tests / carton | |
C. Midstream: 1 test/ pouch, 2400 tests / carton | |
Accuracy | > 99 % |
Certificate | CE 0123, ISO13485 , FSC/CFS |
Lead time | Samples: 3-7 days ; |
Loading Port | Guangzhou / Shenzhen |
Our Main Products: Pregnancy & Fertility test, Drugs of Abuse test | |
HOW DOES IT WORK ?
Human chorionic (hCG) is a hormone, produced by the developing placenta and secreted into the urine. The pregnancy test contains antibodies which specifically react with this hormone. When the sample end of the test is dipped in the urine specimen, the urine specimen is applied to the strip and migrates along the strip. When hCG in the sample reaches the Test Zone region of the membrane, it will form a colored line. Absence of this colored line suggests a negative result. A colored line will appear at the Control Zone region if the test has been performed properly.
HOW TO DO THE TEST?
1. The test strip and urine have to be at room temperature 59-86ºF (15-30°C) for testing.
2. Remove the test strip from the sealed pouch.
3. Immerse the strip into the urine with the arrow pointing towards the urine. Take the strip out after 3 seconds and lay the strip flat on a clean, dry, non-absorbent surface (such as the mouth of the urine container). IMPORTANT: Do not allow the urine level to exceed the MAX (marker line), otherwise the test will not perform correctly.
4. Read results in five minutes. Positive results may sometimes appear as early as one minute but you should wait the full 5 minutes before determining a negative result. Do not read results after more than 5 minutes.
HOW TO READ THE RESULTS?
