Description
NEW IGBT Medium Frequency Induction Smelting furnace equipment systems to fast melting iron ,steel, stainless steel of 50kg furnace
1 IGBT module and Inverting technologies of third generation been used;
Higher reliability and lower maintenance cost.
2 100% Duty cycle, continuous working is allowed at maximum power
output.
3 Display of Voltage and heating current and Working frequency;
4 Simple to install, Installation can be done by unprofessional person ver
y easily;
5 Light weight. fasting heating, good performance for draw and hot
forging application.
6 Water pressure and temperature protection system.
7 Over Current, Over voltage, Under voltage protection system.
8 The separated models are designed to fit the dirty surrounding of
some cases.
Type | MF-80KW |
Work power | 3×380V/415V,440V,480V |
The range of operating voltage | 340V-430V |
Output power | 80 KW |
Working Capacity ( diamater) | 30-60MM |
Input current | 120A |
DC Votlage | 500VDC |
Working Duty | 24hours without stop |
Fluctuating frequency | 5-20KHZ |
The flow rate of cooling water | 0.08-0.16 Mpa 28L/Min |
Water temperature protection point | 50ºC |
Duty cycle | 100%(40degree room temperature) |
Weight: | Main parts: 85KG/ with package 78kg |
Furnace Weight | About 300KG /with package 330kg |
Feeding system | Automatic Feeding System |
Working Material | Steel, Copper, Brass, Alum,Bronze and so on |
Pre-sale service:1. recommend the most suitable machine for customers, according to their requirements. 2. Inquiry and consulting support. 3. Sample testing support. 4. View our Factory.In-sale service:1. Strictly manufacture the machine, according to relevant technical standards.2. Take run test, according to relevant equipment test run regulations.3. Strictly check up the machine, before delivery4. Delivery on time.After-sale service:1. Warranty time: Within 18 months from the date of delivering, 12months from date of receiving.2. Within warranty all parts are free for customer, any fault caused by non-artificial reason, any quality problems such as design, manufacture, or procedure occurs, We shall provide replacement parts after detecting the faults.3. If any big quality problems occurs out of the guarantee period, we will send maintenance technician to provide visiting service after checking with the customer and charge for a favorable price. 5. We will provide a lifetime cost price to the buyer with the materials and spare parts used in system operation, equipment maintenance.6. The above mentioned are only basic aftersale service requirements,we will make more promises related to quality assurance and operation guarantee.
Complaint
