Complaint
The corrugator Belt is a consistent development based on the proven woven high-speed corrugator belt range.
Also is ideal for corrugating systems with high production speed, even load systems and frequently changing paper widths.
we also supply needle corrugator belts, woven corrugator belts, single facer traction belts, etc.
1. Suitable as a top belt with high speed (above 150 m/min) production
2. Heat and super tear resistance
3. Inwoven Aramid edge to reinforce the belts, reduce wear substantially and ensure a long lifetime.
4. Particularly for frequent changes in board width
5. Mostly used for all Corrugating Production Lines.
Corrugator Belt Seam
Model1: Fastener Clipper With Rubber
Model2: Hot JAW Lacing
| Product | Inwoven Aramid Edge Belt - kevlar edge |
| Thickness | 9mm |
| Width range | 1000mm - 2880mm |
| Length | 80 meters |
| Heat-resistance | 240ºC (the kevlar edge upto 350ºC) |
| Tensile strength | 70Mpa |
| Coefficient of friction | ≥ 0.40µ |
| Weight per unit | (7.5±0.3)kg/m2 |
| Air-permeability 40mm water Column | 2.0m³/m2/min |
| Seam | Hot JAW lacing/Clipper with rubber coated |
| Edge | 100mm or 200mm inwoven aramid edge reinforcement (kevlar) |
| Suitable position | Top belt |
| Used on all corrugators high tearing resistance Long lifetime running High abrasion resistance Moisture absorption Heat resistance Low noise | |
Type - I : Waterproof film+Dampblanket+Plasticbag+pallet
Type - II : Waterprooffilm+Dampblanket+Plasticbag+woodpackage+pallet
Note: The wooden box uses a non-fumigation wood box, it's convenient for customs clearance.Could save customers more time.
High-grade material
Safety packing to protect
High absorption of moisture
High durability
Maximum flexibility
Suitable for machine speed 50 - 300M/min
Goodrunningwith low noise
Tear strength
Less trimming
Long lifetime running
