55 Kw 5 Bar Low Pressure Screw Compressor Electric Single Stage Air Screw Compressors

55 kW 5 bar Low Pressure Screw Compressor Electric Single Stage Air Screw Compressors 

1. Adopt large rotor and low

Product features of low pressure screw air compressor

1. Adopt large rotor and low speed to ensure high performance of the machine;
2. Increase oil and gas separation equipment to ensure that the export oil content is ≤3ppm;
3. The air source of the low-pressure screw air compressor is clean, which reduces the number of cleaning nozzles of texturing machines and other equipment, and improves the quality of the finished product;
4. The heat dissipation area of the oil cooler is increased by more than 30% to ensure normal operation in summer without over-temperature;
5. Independently design the internal pressure ratio of the host to ensure a better specific power;
6. Intelligent control system, automatically adjust the exhaust volume according to the customer's usage (frequency conversion model).
7. For the texturing industry, ensure long-term continuous operation, set fault warnings, and do not stop immediately, so that customers are fully prepared for shutdown;
8.  Adopting dual air outlet design, the air outlet temperature can be adjusted according to climate changes, meeting customer needs to a greater extent, and achieving high efficiency and energy saving at the same time.

1. Efficient airend
There is no intermediate transmission, so there is no energy loss; direct drive increases reliability and reduces maintenance costs; large rotors run at low speeds, with higher efficiency, lower noise, lower vibration, and lower energy consumption.

2. High-quality independent oil pump forced lubrication design
(1) Forced lubrication with independent oil pump;
(2) Ensure that there is sufficient fuel injection and a better air-fuel mixture ratio under extremely low exhaust pressure (2kg).

3. Increase customized oil and gas separation system
Increase the customized oil and gas separation system to ensure the ultimate oil and gas separation effect and ensure that the oil content of the air is less than 3ppm.

Low-pressure permanent magnet variable frequency air compressor parameters:

Model	Air delicery (m3/min)	Working pressure (Mpa)	Power(kW)	Noise(dB)	Outlet diameter	Dimension(mm)			Weight(kg)
						Length	Width	Height
DHH22LM	6.30	0.3	22	72	G2	1600	1060	1470	950
	5.30	0.4
DHH30LM	7.02	0.3	30	72	G2	1600	1060	1470	1050
	6.90	0.4
	6.21	0.5			G11/2	1500	940	1415	890
DHH37LM	10.00	0.3	37	72	G2	2000	1120	1590	1180
	9.60	0.4
	8.00	0.5
DHH45LM	12.60	0.3	45	72	G2	2000	1120	1590	1260
	12.10	0.4
	9.30	0.5
DHH55LM	21.00	0.2	55	76	DN150	2100	1677	1892	2000
	15.61	0.3
	14.80	0.4			G2	2000	1120	1590	1350
	12.00	0.5
DHH75LMH	29.50	0.2	75	76	DN150	2100	1677	1892	2100
	21.50	0.3
	21.00	0.4
	15.50	0.5			G2	2000	1120	1590	1450
DHH90LMH	36.00	0.2	90	76	DN150	3050	2000	2000	3300
	28.80	0.3
	22.60	0.4
	21.00	0.5
DHH110LMH	44.50	0.2	110	76	DN150	3050	2000	2000	3450
	35.50	0.3
	28.50	0.4
DHH132LMH	47.00	0.2	132	82	DN200	3720	2100	2150	4800
	44.50	0.3
	35.30	0.4
	28.30	0.5
DHH160LMH	55.70	0.2	160	82	DN200	3720	2100	2150	5100
	51.00	0.3
	44.00	0.4
DHH185LMH	58.00	0.3	185	85	DN250	4010	2250	2250	5800
	49.00	0.4
DHH200LMH	62.00	0.3	200	85	DN250	4010	2250	2250	6000
	55.30	0.4

 

We're professional compressor factory since 1996. Germany Standard and 13 years exporting experience help us won more than 50 loyal foreign agents. 

Our products line are complete,main products as below.
1. Ordinary fixed speed air compressor

2. Energy saving series:
VSD screw air compressor
Permanent magnet VSD screw air compressor
Double stage PM VSD screw air compressor

3. Oil free series:
Oil free water lube screw air compressor
Dry oil free type
Oil free scroll type

4. Low pressure series:
3-5bar, main for textile industry
0.4-1.5 bar,main for waste water treatment

5. 16bar-30bar special for laser cutting industry

6. After-treat equipment
Refrigerated air dryer
Desiccant air dryer
High efficiency pipeline filter

And all the compressor parts.

 

Q1. Are you trading company or manufacture ?

A: We are professional manufacture of screw air compressor of Qidong(Close to Shanghai), China, more than 24 years.

Q2. How long is the delivery time ?
A: For standard voltage ,15 working days. Non-standard ,please contact our sales.

Q3. What's payment term ?
A: T/T, L/C, D/P, Western Union, Paypal, Credit Card, and etc. Also we could accept USD, RMB, Euro and other currency.

Q4. How about your after-sales service ?
A: 1.Provide customers with installation and commissioning online instructions.
  2. Well-trained engineers available to overseas service.
  3.Worldwide agents and after service avaiable.arrange our engineers to help you training and installation.

Q5. How about your warranty?
A: One year for the whole machine and two years for screw air end, except consumable spare parts.

Q6. Do you have any certificate ?
A: Yes, per different customer's market need ,we can offer CE ,ISO etc certificate.

Q7. What about the maintenance ?
A: First maintenance need to be done after 500Hours, and then every 2000-3000 hours to do the normal maintenance, and consider the actual environment.

Q8. How do you control quality ?
A: 1.The raw materials are strictly inspected
     2. Some key parts are imported from overseas
     3.Each compressor must pass at least 5 hours of continuous testing before leaving the factory.

Q9. Do you offer OEM service ?
A: Yes.Both OEM & ODM service can be accepted.

Q10.How long could your air compressor be used?
A: Generally, more than 10 years.