Complaint
1) Central impression type printing machine with better color registration. Due to the big drum, the printed material is supported by the big drum, and greatly improving color registration, especially with extensible materials.
2) All colors printing station drived by the central drum, Less transmission errors because of less gear transmission, increase the registration precision.
3) Adopting high-quality motor, high-quality converter, save the electricity, reduce the run fluctuation.
4) The machine is equipped with blower and heater; and the heater employed central temperature control system, automatic temperature controller, and separated heat source.
5) The use of individual drying oven and cold wind system can effectively prevent the ink adhesion after printing.
6) Roller adopts special steel processing, and through special treatment, greatly reduce the beating range.
7) Printing roller uses static balance and dynamic balance processing, hard anode oxidation treatment, small resistance, beating small, achieves finally perfect printing effect.
8) Accurate printing effect achieved by special gear transmission device.
9) The printing machine all can choose advance configurations to achieve the high quality, the high-definition effect.
Printing Machine Process
Single unwind system→ Automatic Tension→8color flexo printing(8color)→Dry system after printing finished →Surface rewind system
| Model | DCWY-C8600 | DCWY-C8800 | DCWY-C81000 | DCWY-C81200 | DCWY-C81400 |
| Printing color | 8color | 8color | 8color | 8color | 8colors |
| Material feeding width | 600mm | 800mm | 1000mm | 1200mm | 1400mm |
| Max Printing width | 560mm | 760mm | 960mm | 1160mm | 1360mm |
| Max printing length | 300-800mm | ||||
| Machine speed | 150m/min | ||||
| Printing speed | 30-130m/min (depend on material, ink, plate design etc) | ||||
| Main motor | Siemens | ||||
| Material | Paper bag, valve sack, thermal paper, craft paper, food wrapping paper, plastic bag, BOPP, PE, PET, OPP, shrink film, non woven, PP woven | ||||
| Inverter | Delta | ||||
Click picture below to view more similar Machines.
The applicable materials for printing are as follows:
1. Polyethylene, polyethylene plastic film printing
2. Bags (food packaging bags, supermarket handbags, vest bags, clothing bag printing)
3. Web and process paper printing
4. PP woven bag, PVC film, BOPP film, printing
5. Laminated bag roll printing
6. Non woven roller printing
7. PP woven printing of rice bags
8. Paper printing
It is a kind of ideal printing equipment for producing paper packing bag for food, supermarket handbag, vest bag and clothes bag, etc.
Note: some parts of the machine are designed differently for different printing materials. Please indicate the specific printing materials when querying.
Q1. How to install and operate the machine?
Due to the Global Epidemics we can not send the engineer , will provide the manual and installation video.
After the global epidemic end, The seller will send 1 engineer to install, test the production line and train customers' workers in buyers' factory. It will take 1 week for whole installation and training.
Q2. What should we charge for your engineer?
The buyer should cover engineers' salary, visa cost, round-trip air tickets, accommodations, transportation in buyers' country, food, medical care, safety cost, and related cost happens in buyers' country. Also, the buyer should prepare enough labor, electric wire outside the control panel and tools for installations.
Engineer's salary is USD 80/day, depending on how the engineer make you satisfied. The date he arrives and leaves shall be counted as paid day.
Q3. How long is your machine's warranty period?
Warranty period for the delivered equipment will be 12 months after completion of erection but not later than 18months after shipment. In case any item proves to be defective and the damage is confirmed by seller's technicians within this period, the seller will at their choice either send engineer to repair or supply a new one for replacement free of charge on the basis of CNF delivery.
The above item does not include the parts, which have regular spares or the parts damaged from normal wear, abnormal operation, improper maintenance and inadequate civil works. The seller is not liable for any production loss under any circumstances.
Q4. How do we solve the machine problem after your engineer leaving?
Generally speaking, there will be no problem after finish installing. In case you have any problem. You can contact our after sales specialist at any time. Engineers will help to take a solution video according your description.
Q5. How do you arrange packing for machine?
As per export standard, they will also be treated before delivery against damage and rusting.
