Complaint
| ABS A010208 Good mechanical properties | Injection molding Automobile articles |
| Properties | Test Method | Test Condition | Units | Typical Values |
| Physical | ||||
| Melt Flow Rate | ASTM D-1238 | 220ºC, 10Kg | g/10min | 50 |
| Specific Gravity | ASTM D-792 | 23ºC | g/cm3 | 1.2 |
| Ash | - | 800ºC,30min | % | - |
| Mechanical | ||||
| Tensile Strength | ASTM D-638 | 50mm/min | MPa | 40 |
| Elongation at Break | ASTM D-638 | 50mm/min | % | 25 |
| Flexural Strength | ASTM D-790 | 2mm/min | MPa | 60 |
| Flexural Modulus | ASTM D-790 | 2mm/min | MPa | 2100 |
| Impact Strength, IZOD non-notched | ASTM D-256 | 23ºC | KJ/m2 | - |
| -30ºC | KJ/m2 | - | ||
| Impact Strength, IZOD notched | ASTM D-256 | 23ºC | KJ/m2 | 22 |
| -30ºC | KJ/m2 | - | ||
| Thermal | ||||
| Heat Deflection Temp. | ASTM D-648 | 0.46MPa | ºC | 85 |
| 1.8MPa | ºC | -- | ||
| Others | ||||
| Flammability | UL94 | 1.5mm | V0 | |
| 3.0mm | 5VA | |||
| 2.5mm | 5VA | |||
| IEC 60695-2-12 | GWFI:850/3.0 | PASS | ||
Are you a trading company or manufacturer?
We are a manufacturer.
About Sample?
A 5 KG Free Sample can be offered per your request.
About Material Color?
We can make the material to your appointed color according to Pantone/RAL#.
How does your factory control the quality?
Quality is the Priority, we always pay great importance to quality from beginning to end, and we have professional QC for item quality from spare parts to finished goods.
How many days for mass production?
20 days after all artwork and 30% deposit are confirmed.
How can I get the samples? is the sample free?
7-10 days to send free samples by DHL, TNT, and UPS.
