China Quality Pinch Valve with Pneumatic Operation Used for Mining

Min.Order: 1
Product origin: Suzhou, Jiangsu, China
Infringement complaint: complaintComplaint
US$ 360

Description
Construction is as follows:  
Name PINCH VALVE
Size DN15-DN600;1/2"-24"
Normal pressure PN10, PN16, 150LB, 10K
Design standardQ/JBGN02, GB 12239 
Face to Face DimensionQ/JBGN02, GB12221-89, QY 2000-2
Flanged DimensionJB78, GB4126, ANSI B16.5, DIN3202, JIS
Inspect & TestBS 6755, GB/T13927 
Body materialDuctile Iron,casting steel, stainless steel
Sleeve materialNatural rubber, EPDM, NBR, FPM, IIR
Suitable temperature ≤80°C
ApplicationSlurry, Ore pulp, Abrasive, Dry and Wet type dust, Solid liquid and corrosive medium.
Acidic environmentNACE MR0175
OperationHand Operated,Gear Operated, Electrical Actuated, Pheumatic Actuated
Product Introduction
    Pinch valve (valve) is the introduction of domestic and foreign advanced technology absorption valve of the advantages of the development of a new type of valve, popularity due to its excellent wear resistance, suitable for low pressure pipeline particle slurry or chemical medium conveying control system. Pipe clamp valve open is convenient and flexible, sealed performance is good, put an end to the occurrence of the phenomenon such as PaoMaoDiLou, hose can be replaced periodically, and the body can use for a long time, save money.
Characteristics
1;Adopt unique rubber formula, corrosion resistance, wear resistance, resistance to pressure.
2;Valve replacement parts rubber hose. Simply replace the hose, the valve is in good as new.
3;Absolute seal. Mechanical parts of the valve are protected, only rubber and access to the processing medium, integral flange, do not need to seal, no seal, there is absolutely no problem.
3;Cold resistant performance is good. Due to the fluid flow in the elastic rubber hose, which excludes the frost crack caused by the fluid crystallization shell, etc.
4. Selected according to different fluid hose manufactured by different technics, the applicable scope is wide, classified as type A, type B, C three kinds.
5;Working pressure is less than 1.0 MPa, in the presence of negative pressure in the process use special manufacture of rubber hose in the system.

Structural sketch and size of pneumatic pinch valve 




Product display


Company  Introduction 


Scroll to Top