Laser Infrared Counter-Fire Alarm The Perimeter Wall of Nuclear Power Plant Invades Infrared Detector Outdoors

Min.Order: 1
Product origin: Dongguan, Guangdong, China
Infringement complaint: complaintComplaint
US$ 126.5 ~ 383

Description

Product Description

Equipment modelQJ-1QJ-2QJ-3QJ-4
The beam numberA beamDouble beamThree beamFour beams
Backup batteryLithium battery 12V Standby time: 24 hoursLithium battery 12V Standby time: 24 hoursLithium battery 12V Standby time: 24 hoursLithium battery 12V Standby time: 24 hours
Equipment dimensions65.5*65.5*229MM65.5*65.5*409MM65.5*65.5*589MM65.5*65.5*769MM
Use the distance1-500m1-500m1-500m1-500m
Equipment of power supplyDC12V2ADC12V2ADC12V2ADC12V2A
Equipment power8W12W16W20W
Alarm outputSwitching valueSwitching valueSwitching valueSwitching value
Using the environmentTemperature - 20 ºC~+50 ºC 

 


Multiple blocking alarm modes

The product has the characteristics
of long detection distance and strong
penetration. It can adapt to severe
weather such as rain, fog, frost, snow,
sand and dust. Concentrated laser beam,
strong anti-interference,extremely low false
alarm rate.

 

Multiple beams are available
The detection distance of one to eight beams of the laser aiming detector is 50 meters, 100 meters, 200 meters,
300 meters, 400 meters and 500 meters. Please consult our customer service if you need the corresponding number of meters.

Customizable choice of six beam and eight beam

Applicable places/cases
Applicable places/cases are applicable to various safety protection places such as troops/prisons/restricted
areas/petrochemical railways/electric power/banks/engineering/schools/high-end communities. The laser is
imported from Germany with high stability and a service life of more than 10 years. If the customer needs
special places,the visible light alarm function can be customized.


Application case
It can adapt to rain, fog, frost, snow, sand and dust and other bad weather

Alarm principle
One is the transmitter and the other is the receiver. Four invisible lines of protection are formed between the two pairs
of shots. When an illegal intruder passes by and blocks the light of the opposite shot, the intruder will be immediately
alarmed through the horn on the spot to deter the intruder.And the alarm information will be immediately transmitted to the perimeter monitoring platform of the security room through
the host, and the video monitoring will immediately pop up the image of the intrusion zone.

Schematic diagram of network communication alarm of laser aiming system

Debugging of light seeker
Each group of laser modules is composed of two laser heads, one is visible light and the other is invisible light. During
debugging, the visible light is activated by pressing the key to facilitate the alignment. The visible light is automatically
extinguished in five minutes to reduce the debugging time.

Title goes here.

Power on the transmitter and the receiver. Open the front shell of the transmitter and find a red key at the position of the
circuit board. Press once to hear the buzzer ring, and the first laser transmitter at the top will emit a beam of visible light
(Note: visible light cannot be directly viewed by the eyes, otherwise it will cause damage to the eyes).

For multi beam laser aiming, repeat the above process for each beam until all laser beams are aligned to the corresponding
receiving window, and the debugging.


Installation method
The aluminum alloy shell adopts a new oxidation process, with a high dazzling blue appearance and high-end atmosphere.
The visible light alarm function can be customized if the customer needs in special places.

Product Tag:
Related categories:
Scroll to Top