Serial Port Communication Sub Module RS232 RS485 RS422 Data Acquisition Remote I/O Modules
CT-5321 Modbus Serial Port Module
The Modbus serial port module supports 1 channel RS485/RS232 /RS422 (optional), supports Modbus RTU/ASCII protocol, and supports master, slave and free transparent transmission mode.
The serial Module CT-5321 could be applied with the adapter modules, so it could convert Modbus into other protocols such as Modbus TCP, Profinet, EtherCAT, EtherNet/IP, etc. When the module is used, serial port parameters and Modbus instructions should be configured in IO Config software.
Devices with RS485/RS232/RS422 interface, which support modbus-RTU /ASCII, could be applied with CT-5321 to realize interconnection with upper PLC or upper computers. CT-5321 could be applied with devices such as: PLC, DCS, remote IO, VFD, motor start protection device, intelligent high and low voltage electrical apparatus, power measurement device, intelligent field measurement equipment and instruments, etc.
Our remote IO model list:
CT-1228 (new) | CT-1228:8 channels digital Intput/24VDC/source type, NPN, supports counting function(Max. counting frequency of 200Hz),the input voltage is 24VDC, the input low level is valid |
CT-1218 | CT-1218:8 channels digital Intput/24VDC/sink type, PNP,supports counting function(Max. counting frequency of 200Hz),the input voltage is 24VDC, the input high level is valid |
CT-121F | CT-121F:16 channels digital Intput/24VDC/sink type, PNP,supports counting function(Max. counting frequency of 200Hz),the input voltage is 24VDC, the input high level is valid |
CT-222F | CT-222F: 16 channels digital Output, source, PNP, 24Vdc/0.5A,the output voltage is 24VDC, the output high level is valid |
CT-122F | CT-122F: 16 channels digital input, source, NPN, 24VDC, supports counting function(Max. counting frequency of 200Hz),the input voltage is 0V, the input low level is valid |
CT-221F | CT-221F:16 channels digital Output/24VDC/0.5A/sink type, NPN,the output voltage is 0V, the output low level is valid |
CT-124H | CT-124H: 32 channels digital input, sink or source, 34Pin male connector, 24Vdc, counting function supported (counting frequency up to 200Hz) |
CT-222H | CT-222H: 32 channels digital output, source, 24Vdc/0.5A,34Pin male connector |
CT-2224 | CT-2224 4-channel digital output ,Source type, 5.5-40VDC ,single channel Max output. 3.3a /4 channel with Max output. 2A per channel. Channels can be used in parallel |
CT-2228 | CT-2228:8 channels Digital Output ,source,PNP,24Vdc/0.5A, the output voltage is 24VDC, the output high level is valid |
CT-2718 | CT-2718:8 channels Relay Output ,( 9~30Vdc@2A,[email protected], [email protected]) |
CT-3168 | CT-3168:8 channels Analog Input,0~5Vdc,-5~5Vdc,0~10Vdc,-10~10Vdc,15 bits/16 bits,Single-end |
CT-3238 | CT-3238:8 channels analog input/ 0& 4-20mA/15-bit,single ended |
CT-3268 | CT-3268:8 channels analog input/-20~20mA/15-bit,single ended |
CT-3713 | CT-3713:3 channels Analog Input,RTD(PT100) |
CT-3723 | CT-3723:3 channels Analog Input,RTD(PT1000) |
CT-3804 | CT-3804:4 channels Analog Input,Thermocouple( J type, K type, E type, T type, Stype, R type, B type, N type, C type) |
CT-3808 | CT-3808:8 channels Analog Input,Thermocouple( J type, K type, E type, T type, Stype, R type, B type, N type, C type) |
CT-4154 | CT-4154:4 channels Voltage Output,0~5Vdc,-5~5Vdc,0~10Vdc,-10~10Vdc,16 bits,Single-end |
CT-4158 | CT-4158:8 channels Voltage Output,0~5Vdc,-5~5Vdc,0~10Vdc,-10~10Vdc,16 bits,Single-end |
CT-4234 | CT-4234:4 channels analog output, 0& 4-20mA/16-bit,single ended |
CT-4238 (new) not available for sale | CT-4238:8 channels analog output, 0& 4-20mA/16-bit,single ended |
CT-5102 | CT-5102: 2 channels encoder/5V input/Quadrature decoding, direction pulse, high speed counting, 2channels DI, 2channels DO, 2 channels encoder/5V input/Quadrature decoding, direction pulse, high speed counting, 2channels DI, 2channels DO, 2 way 5V output, 32bit, Max input frequency of 1.5MHz2 way 5V output, 32bit, Max input frequency of 1.5MHz |
CT-5112 | CT-5112: 2 channels encoder/24V input/Quadrature decoding, direction pulse, high speed counting, 2channels DI, 2channels DO, 2 way 24V output, 32bit, Max input frequency of 1.5MHz. |
CT-5122 | CT-5122: 2-channel encoder/SSI input |
CT-5142 | CT-5142: 2-channel encoder/differential input/quadrature decoding, direction pulse, high-speed counting, 2-channel DI, 2-channel DO, 32bit, maximum input frequency 10MHz |
CT-5321 | CT-5321:serial port communication sub-module (RS232, RS485,RS422, either serial port is optional, it supports modbus-RTU /ASCII,master or slave mode, transparent transmission mode) |
CT-5711 | CT-5711:Fieldbus Extended Master Module( CT-5711 need work with CT-5721) |
CT-5721 | CT-5721:Fieldbus Extended Slave Module ( CT-5711 need work with CT-5721) |
CT-5801 | CT-5801:Terminal module as extra module, take no module channel, ( required for each network adapter) |
CT-623F | CT-623F:8 channels / digital input / 24VDC / source or sink type &8 channels / digital output / 24VDC / source type, single output channel max current 500mA |
CT-7220 | CT-7220:Expansion power Supply( System power input 24Vdc,Output 5Vdc/2A,Field power input 24Vdc,Output 24Vdc/8A) take no module channel. CT-7220Power Supply Extension Module required as BOM included a 15 module rack, aslo IO Config software noticed the decreasing "Total Residual Current", |
MTE034 | MTE034: Din Rail, 32 channels male connector,spring terminal connection ( accessories for CT-124H and CT-222H ) |
DX210-3SFX-2000 | Length 2 meters, flame retardant material, flexible wire, both ends are female connector ( accessories for CT-124H and CT-222H ) |
General parameters | ||
Power | Max.500[email protected] | |
Isolation | I/O to internal bus: opto-couple isolation (3KVrms) | |
Field Power | Nominal:24Vdc, Range:22-28Vdc | |
Wiring | I/O Wiring:Max.1.5mm²(AWG 16) | |
Mounting Type | 35mmDIN-Rail | |
Size | 115*14*75mm | |
Weight | 65g | |
Environment Specification | ||
Operational Temperature | -40~85ºC | |
Operational Humidity | 5%~95% RH(No Condensation) | |
Protection Class | IP20 | |
Serial Port Parameters | ||
M/S/F:Channel Number | 1Channel | |
M/S/F:Interface | RS485/RS232/RS422 | |
M/S:Protocol | Modbus RTU/ASCII | |
M/S/F:Working Mode | Modbus Master, Slave, Transparent Transmission | |
M/S/F:Baud Rate | 300bps-500Kbps | |
M/S/F:Data Bit | Bit 7, Bit 8 | |
M/S/F:Parity Checking | None, Odd, Even | |
M/S/F:Stop Bit | Bit1, Bit2 | |
M/S/F: Character Interval | 1.5t-200t | |
F: Byte Order Conversion | Prohibit, Enable | |
M/F:Response Timeout | Customized,default:1000 | |
M/F: Polling Timeout | Customized,default:100 | |
M: Read Data Processing Mode | Hold the last input value, clear the input value | |
M: Data Output Mode | Polling, event triggering (data changes) | |
M: Module Control Enable | Prohibit, Enable | |
M: Module Control Mode | Level trigger (continuously valid), rising edge trigger (single valid) | |
M: Power on Event Output | Prohibit, Enable | |
S:Slave ID | Customized,default:1 | |
S:Response Time | Customized,default:50 |
Dimension
Wiring terminal
Installation
DIN-rail
1.How could i get the manual, technical detail and software?
You can click the software & manual page to download the realted product details or contact us to get it.
2.Do you have after sale support?
Yes we provide all the realted technical support including remote support.
And We will provide you any necessary online training and support too.
3. What is the warranty?
All the ODOT products is with the warranty of 3 years.
Only ODOT-S7PPI/PPI V2.0 is with a warranty of 1 year.
4. How is the payment terms?
100% T/T in advance.
5. What is your shipping channel?
We support all the main stream courier company including: Fedex, TNT, DHL, UPS, and Aramex.
6. What is your lead time?
We will arrange the delivery in 1~ 2 day if we have finished products in stock.
If we have no stock and the lead time will be 1~2 weeks.
7. Do you provide any customized services?
Yes, please contact us with your application details.
We accpet deep customized services including OEM, ODM and there will be a MOQ.
8. Do you accept cooperation as distributors?
Yes, partner and distributorship inquiry are warmly welcomed.