SS304 PN16 Pneumatic thread Air Control Angle Seat Valve with Plastic Actuator
threading Ends Angle Seat Valve
Angle Seat Valve with stainless steel Pneumatic Actuator
Features:
The pneumatic angle seat valve can save space by maintaining the flow rate. It uses a single acting pneumatic actuator with spring safety protection to operate the guide angle seat valve. When using it, it should choose to be normally open or normally closed. It is widely used in automation industry control fluid, foodstuff dairy industry, domestic water, common pipeline fluid medium and so on Pneumatic angle seat valves are widely used for short and frequent starts, with the characteristics of sensitive response and accurate action. When used in conjunction with electromagnetic valves, pneumatic control can accurately control the flow of gas and liquid. It can achieve accurate temperature control and liquid dripping requirements. The damp heat sterilization cabinet should use corner seat valves to control the amount of steam and accurately control the temperature
Technical Data:
Standard | SMS, DIN |
Material Contact Parts | SS304(1.4301)-CF8,SS316 (1.4401)-CF8M |
Material Non-contact Parts | SS304(1.4301)-CF8 |
Size | DN10-DN80 |
Actuator Size | 27mm,32mm,40mm,50mm,63mm,90mm,80mm,100mm,125mm |
Connection | Butt-weld,Tri-clamp, Female Thread(BSP.BSPT,NPT), Flange |
Seal Material | PTFE, the material comply with FDA21CFR117.2600 |
Cylinder | Double Acting, Single Acting |
Drive Option | Manual, Pneumatic Control,Position Sensor, C-top Controller, C-top Controller (AS-I) |
Fluid Max. Pressure | 1.6bar (232psi) |
Control Pressure | 0.3-0.8bar (43.5-116psi) |
Fluid temperature | 14 ~ 428°F (-10ºC~+220 ºC) |
Ambient temperature | 14 ~ 176°F (-10ºC~+80ºC) |
Surface Treatment | Sandblasting, Polishing, Electrolysis |
Control Type | Normally closed,Normally open |
Control Fluid: | Neutral gas, Air |
Applicable Fluid | Water,Alcohol,Oil,Dye,Steam,Neutral gas or liquid,Organic solvent,Acid and lye |
Working principle:
In non working conditions, due to spring force, the valve is usually closed (open). When the actuator piston is compressed by gas, the valve opens (closes). The double acting form relies on compressed gas to control the valve switch Single acting ( the pneumatic head usually a hole); working principle: to reach the open and close function according to spring reset, normally it divide into open and close. Double acting ( the pneumatic head usually two holes); working principle: give the air to control switch. (it can choose double function and spring-return, control precisely according to customer's requirement.)
Options:
1.The available materials are SS316 (1.4401) CF8M and SS304(1.4301) CF8 2. The available sizes are from DN10 to DN80 3. Connection can be Butt-weld,Tri-clamp, Female Thread(BSP.BSPT,NPT), Flange 4. Actuator Size has 27mm,32mm,40mm,50mm,63mm,90mm,80mm,100mm,125mm 5.Cylinder includes of Double Acting and Single Acting 6.Drive Option can be Manual, Pneumatic Control,Position Sensor, C-top Controller, C-top Controller (AS-I) 7.Control Type has Normally closed,Normally open
Material:
Valve body material: Stainless Steel Sealing material: PTFE Executive housing: Polyamide, Stainless Steel
Technical Specifications:
Fluid Max. Pressure: 1.6bar (232psi) Control Pressure: 0.3-0.8bar (43.5-116psi) Temperature range Fluid temperature : 14 ~ 428°F (-10ºC~+220 ºC) Ambient temperature: 14 ~ 176°F (-10ºC~+80ºC)
Catalogue of threading angle set valves:
Related items of 304 316 Sanitarty Angle Set valves:
Control gas:neutral gas,air control liquid:antomation industry control fluid,foodstuff dairy industry,domestic water,common pipeline fluid medium and so on.
The angle seat valve is extensively use to frequently start in short time,with feature of response delicacy and exact action.
Wenzhou Compass Machinery Co.,Ltd is one of the manufactures which are capable of producing high precision stainless steel sanitary equipment and pipeline connection parts.We are a modern enterprise which integrates scientific research and production.
Compass can provide a variety of products,such as sample valve,divert valve, mix proof valve,pressure relief valve, manual and pneumatic butterfly valve, check valve, diaphragm valve , ball valve, pipe fitting, manhole cover, pump, tube/pipe and other related products. All products can be made according to different materials and industrial standard, such as SMS, DIN. 3A, ISO, RJT, DF, BS, DS and BPE.
Our products are widely applied to dairy, food, beer, beverage, chemical industrial of equipment, and cosmetic industries. All technical aspects have reached the international leading levels and are in conformance with GMP requirements.
Provide process design, machinery manufacturing,installation,technical training.
Compass applies the most advanced CNC machine from Japan for processing,cutting machines, automatic equipment,complete inspection equipment,excellent quality control system, an after-sale service center and strong production capacity. It makes each products go to forefront of our line and shortens the quality gap between imported equipment as well as accessories.
Q: DO YOU HAVE MILL TEST CERTIFICATE? |
Yes, Each order is traceable by Material certificate EN10204 3.1, and we can also offer pressure testing report,roughness test report if Client need. |
Q: DO YOU HAVE PRODUCT WARRANTY |
Yes,12 months warranty. 100% inspection on finished products before dispatch. Inferior products can be returned or replaced.Repair parts is supplied for replacement. |
Q: WHAT'S THE MOQ? |
No MOQ for standard products. Customized products can be discussed. |
Q: MAY I HAVE FREE SAMPLES? |
Free samples can be provided for starting cooperation, Freight is collected by Client. |
Q: HOW LONG IS THE DELIVERY TIME? |
Standard item are in stocked--Normally 3-5 days. Bulk order usually takes about 20-25 days. |
Q: WHY WOULD I CHOOSE YOU? |
1.Hard-working labor worker and advanced machine ensure large production capacity. It will give our clients fast delivery time. |
2. Professional engineer and designer ensure the product parameter is well manufactured. |
3. 100% inspection on finished products before dispatch, make sure the product quality is good. |
4. High effective sales team quick response to any quote and complaint. |
Contact us
Ms Jennifer Wang
Wenzhou Compass Machinery Co.,Ltd
Add: 556 Binhai 3rd, Street 4,Binhai Park,Wenzhou,Zhejiang,China Zip325025
Tel: +86 (0)577 86822997 | Fax:+86 (0)577 88179957