Description
Smaraad China Factory 300W 600W 800W 1000W 1500W 12V 24V MPPT Wind Turbine Solar Panel Hybrid Boost Controller
Product Description
General Safety Information
Ø Before receive the product, check it carefully. Make sure whether the product is damaged during transport. If it is damaged,
contact the shipping company or our company immediately.
Ø All installation and electrical work must only be performed by professional personnel.
Ø Without any professional guidance, do not disassemble or attempt to repair the controller.
Ø Do not use the controller without batteries.
Ø Do not cut off the connection of controller and batteries when controller is working normally.
Ø Keep children away from controller.
Ø Do not allow water to enter the controller.
Ø Confirm that power connections are tightened to avoid excessive heating from a loose connection. Make sure cables are suitable
for system
Product Parameters
MAX-T48-W400S200II-1 |
Battery parameters |
Applied battery voltage | 48V |
Battery protect method | Reverse connection protection (do not burn any components, with voice prompt); over voltage protection, under voltage protection (for street light and such kind of load) |
Voltage at the over voltage protection point | 58.0V±0.2V |
Voltage at the over voltage recovery point | 55.0V±0.2V |
Voltage at the under voltage protection point | 42.0V±0.2V |
Voltage at the under voltage recovery point | 46.0V±0.2V |
Battery temperature compensation | 5mv/ºC/2V (settable) (optional component) |
Wind turbines input parameters |
Rated power of applied Wind turbines | 400W/48V |
Rated power of the terminal | 18A dc (after rectification) |
Max. input current of the terminal | 30A dc (after rectification) |
The default speed of the Wind turbines generation with limited speed | 500 Rpm (settable) |
The default current of the Wind turbines generation with limited current | 30A (settable) |
Wind turbines protection method | over rev protection, over current protection, induction lightening protection |
Unloading method | PWM stepless high-frequency soft unloading (built-in) |
MPPT function | Boost MPPT model ( automatic tracking or 5 segments curve tracking) |
Input current of MPPT channel | 12A |
PV input parameters |
Rated input current of applied PV | 200W48V(standard) |
Rated input current of terminal | 5A(standard) |
Charging voltage drop | <0.2V |
PV protection methods | Reverse connection protection (voice prompt) |
Unloading method | Open circuit unloading |
Others |
Display mode | Liquid crystal (LCD) display |
Communication mode | TTL232(5V electrical level) RS485 (optional) |
Displayed parameters | Wind turbines input voltage/current/power/generated energy/rev/unloading current PV input voltage/current/power/generated energy Battery voltage/charging current/power/total charging capacity/battery status information output current/power/abnormal information of the 2nd output port |
Power consumption in standby mode(screen backlight closed) | About 20ma /24V system |
Operating mode | 3M foil key operation (4 keys) |
Working temperature / humidity range (environment) | -40~+80ºC/20~85%RH(non condensing) |
Protection grade | IP41 |
Controller size (L*W*H) | 155mm*148mm *84mm |
Net weight | 1.42KG |
Buyer show
Packaging & Shipping
About us
FAQ
1. Q: Is it easy to install the whole system?
A:Very easy, every customer can do it by themselves, we will supply all the components for installation and very detailed manual for you. If you still have confusion, our technician could support you all the time by video to make sure there is no mistake of connection.
2.Q: Distance between wind turbine, controller and battery?
A: Normally better within 10m from wind turbine to controller, and controller to batteries, Batteries and inverter to load within 20-50m.
3.Q: For horizontal axis wind turbines VS vertical axis wind turbines, which kind of efficiency is better?
A:For same watts at same wind speed, the output of horizontal axis wind turbines is more efficient than that of vertical axis wind turbines. But if your wind speed is very low, we suggest you to use our vertical SS type.If your wind speed is over 8m/s, our vertical wind turbine are also with around 80-90% efficiency. No noise is the most popular points.
4. Q:Does our wind is enough for a wind generator ?
A: Please contact our sales with following points :
1. What appliance do you want to running by the system? How many watts are they and their working time .
2. Your annual average wind speed .you could check on google with your exact site
3. What kinds of system do you want ? On-grid or off-grid?
5. Q:Can I buy full wind and solar system from you?
A: Sure, Smaraad is a one stop energy solution provider, we have qualified technician team to design for your system, including wind turbine,solar panel system and storage system, we will provide clear installation instruction and you only need to ask a technician to install it for you. And most of parts, we have warehouse in Poand, Russian, Spain and USA.
6. Q: Do your products have CE certification
A: Sure, our products have sold to more than 40 countries and our products have been approved by local rules and test very good function.
7. Q: The delivery date for each type?
A:Normally for wind turbine below 1kw, we have stock in China or in Our warehouse in EU, Russian, so it could delivery within 1-3days after payment received
8. Q: If we could be your agent or distributor?
A: Pls talk with our sales for this, our company are warmly welcome more partner to join us, but you have to double check for some area we have agents already.