Smaraad China Factory 2000W 48V MPPT Wind Generator Solar Panel Charge Controller
General Safety Information
MAX-T12/24-W2000S200II-1 | |
Battery parameters | |
Applied battery voltage | 12/24V |
Battery protect method | Reverse connection protection (do not burn any components, with voice prompt); over voltage protection, under voltage protection (for street light and such kind of load) |
Voltage at the over voltage protection point | 14.5/29.0V±0.2V |
Voltage at the over voltage recovery point | 13.5/27.5V±0.2V |
Voltage at the under voltage protection point | 10.5/21.0V±0.2V |
Voltage at the under voltage recovery point | 11.5/23.0V±0.2V |
Battery temperature compensation | 5mv/ºC/2V (settable) (optional component) |
Wind turbines input parameters | |
Rated power of applied Wind turbines | 1000W/12V 2000W/24V |
Rated power of the terminal | 60A dc (after rectification) |
Max. input current of the terminal | 100A dc (after rectification) |
The default speed of the Wind turbines generation with limited speed | 500 Rpm (settable) |
The default current of the Wind turbines generation with limited current | 100A (settable) |
Wind turbines protection method | over rev protection, over current protection, induction lightening protection |
Unloading method | PWM stepless high-frequency soft unloading (built-in) |
MPPT function | Boost MPPT model ( automatic tracking or 5 segments curve tracking) |
Input current of MPPT channel | 24A |
PV input parameters | |
Rated input current of applied PV | 100W/12V 200W/24V(standard) |
Rated input current of terminal | 10A(standard) |
Charging voltage drop | <0.2V |
PV protection methods | Reverse connection protection (voice prompt) |
Unloading method | Open circuit unloading |
Discharge the output port parameters | |
output | 2 outputs |
Current of each output | 24A |
Output control methods | light control, time control, reverse output, PWM output (250HZ, only the 2nd output has it) |
Others | |
Display mode | Liquid crystal (LCD) display |
Communication mode | TTL232(5V electrical level) |
Displayed parameters | Wind turbines input voltage/current/power/generated energy/rev/unloading current PV input voltage/current/power/generated energy Battery voltage/charging current/power/total charging capacity/battery status information output current/power/abnormal information of the 2nd output port |
Power consumption in standby mode(screen backlight closed) | About 20ma /24V system |
Operating mode | 3M foil key operation (4 keys) |
Working temperature / humidity range (environment) | -40~+80ºC/20~85%RH(non condensing) |
Protection grade | IP41 |
Controller size (L*W*H) | 155mm*148mm *84mm |
Net weight | 1.42KG |
1. Q: Is it easy to install the whole system?
A:Very easy, every customer can do it by themselves, we will supply all the components for installation and very detailed manual for you. If you still have confusion, our technician could support you all the time by video to make sure there is no mistake of connection.