Diesel Generator Genset Automatic 12 Volt 6A Battery Charger

BAC series switch b5attery chargers use the latest switch power .
devices. Designed according to the charge characteristics of the .
lead-acid battery for starting generators, BAC chargers are suitable for the long time
supplement charge(floating charge) of the lead-acid battery. The maximum charging
current is 6A for 12V and 10A for 24V.


 

Category	Items	12V	24V
Model	BAC	BAC-1206	BAC-2403/2405/2410
Input	Nominal input voltage	AC(100~240)V
	Max input voltage	AC(90~305)V
	Frequency	50Hz/60Hz
	Max input current	2.5A	2.5A/2.5A/4A
	Efficiency	>85%
Output	Charging current	4A~6A,error±2%	2A~3A/5A/10A,error±2%
	Factory charging current	6A	3A/5A/10A
	Max output power	135W	135W/135W/290W
	Min output voltage	7.5V
	No-load output voltage	13.8V,error 1%	27.6V,error 1%
	No-load consumption	<3W
Insulation	Insulation resistance	When between input and output, output and shell are both DC500V 1min, the insulation resistance RL≥50MΩ
	Insulation voltage	When between input and output, output and shell are both AC1500V 50Hz 1min, the leakage current IL≤3.5mA
Working conditions	Working temperature	(-30~55)ºC
	Storage temperature	(-40~85)ºC
	Working humidity	10%RH~95%RH(no condensation)
Structure	Weight	0.65kg	0.65/0.65/1.15kg
	Dimensions(L*W*H mm)	143*96*55(3A/5A/6A); 205*146*55(10A);

PERFORMANCE FEATURES

1. Designed in switch power structure. Wide range of the input voltage. Small volume,
light weight and high efficiency.
2. Automatic charge using the 2-stage charging method(i.e., constant current first and
then constant voltage). The process
is in full accordance with the battery charging characteristics, and can prevent
overcharging of lead-acid battery and maximize battery life.
3. Have protection functions for short-circuit and reverse connection.
4. Charging voltage and current can be regulated by potentiometer on site.
5. LED status display: AC power indication, charging indication
6. Horizontal instllation. Easy to install.



CONFIGURATION

Voltage regulation
When regulating voltage on site, it is needed to disconnect the battery from the charger.
Measure the charger output voltage while regulating the voltage potentiometer (VOLT)
until the appropriate value is reached.

Current regulation
Connect the output to the battery. Measure the charging current when the charging
voltage is not higher than 25.0V (12.5V). Regulate the current potentiometer (AMP) to
set the appropriate charging current.
The output current can also be estimated according to the current potentiometer scale.