Description
Brief introduction of Cartridges filling and capping machine:
1.The sample confirmed 2.Pictures of KSP50-1N Cartridges filling and capping machine:
Appearance drawing of Cartridges filling and capping machine
Operating instructions of Cartridges filling and capping machine
Cartridges stand in vertical placement; the cartridges are pulled out by hand, put in the mouthpieces, which are held tight and turned with hands to make them turn down in the reprint box.Hand-held reproduced box cartridge bottle buckle into cartridge bottle filling of tube box machine, to start the machine, tube box in charge of wheel rotation, the pipe and rolled into the trough, and negative pressure adsorption in the tube slot, tube slot on the turn, make the cartridge bottle down in the plate of mechanical hand, pressure pipe cylinder to press the cartridge bottle tube into location manipulator, And is held by the mechanical station hand clockwise circular motion.The manipulator at the station holds the cartridge bottle in a circular motion to the end plug station. At this time, the end rubber plug arranged by the manager plug vibration plate is hanging on the cartridge bottle at this station (Note: At this time, the bottle mouth is down, the tail mouth is up) on the tail mouth, after the two converge, the cylinder action will be pressed into the cartridge bottle tail plug through the tail mouth, and pressure to the deepest, in order to maximize the discharge of the air in the cartridge bottle, at this time to complete the tail action.The station disk continues to operate, to the pipe turning position, under the action of the pipe turning mechanism, the station manipulator drives the cartridge bottle to turn 180 degrees, so that the cartridge bottle mouth up, the tail mouth down, so as to complete the turning work.The filling needle is pressed down and inserted into the bottle mouth and sealed with the bottle mouth. At this time, the feeding pump goes up, the feeding valve opens, and the liquid medicine (or ointment) is injected into the bottle under the drive of the servo motor. Under the action of the drug pressure, the rubber plug goes down with the liquid medicine to complete the precise filling of the bottle.The filled cartridge bottle rotates to the capping station and merges with the finished aluminum cap, and the capping manipulator installs the aluminum cap and capping it on the mouth of the cartridge bottle, and continues to run to the capping station. The capping manipulator presses the aluminum cap, and the capping manipulator acts to secure the aluminum cap.The filling and capping cartridge bottle is finished at the pipe outlet, and the pipe outlet manipulator pushes the cartridge bottle out of the station plate, into the linear vibration conveying track, and sends the kSP50-1N cartridge bottle filling and capping machine by hanging and pulling. To this cycle of work, to achieve automatic filling and sealing cycle, continuous production.
Mechanical configuration of Cartridges filling and capping machine
| NO. | Name | Configuration | Note |
| 1 | Rack | 304 Stainless steel | |
| 2 | Observation window | 304 Stainless steel + tempered glass | |
| 3 | Table above | 304 Stainless steel | |
| 4 | Part in contact with material | 316L Stainless steel or sanitary grade material | |
| 5 | Below the mesa | The relevant mechanical materials are sealed in the case | |
| 6 | Note material | 1. The ceramic pump | |
| 2. Ceramic valve |
| 3. Servo feeding |
(1) Suitable for cartridge bottle specification: 1mL-10ml.(2) Adapt to the cartridge bottle: all kinds of cartridge bottle brand types.(3) Stable production speed: 38-45 PCS/min (based on 1mL/PCS).(4) Voltage: three-phase 380V, 50HZ 1.5KW(5) Air pressure: 0.8mpa, flow rate 30 l/min(6) Bottling rate (top bottle blowing tube) : 100%(7) Stopper rate: 99%(8) Capping rate: 99%(9) Pipe output rate: 100%(10) Fill with nitrogen(11) Filling accuracy: 3ml, ±1%(12) Broken bottle rate: 0.01% (depending on the quality of tube)If you are interested in this, please contact me: Nana ZhangShanghai Medigrade Industry Co.,LtdWaigaoqiao Free Trade Zone, Shanghai,China. 200137 medigrade.en.made-in-china.com
Complaint
