Single-Port 10/100/1000Mbps 120W Wall Mount Over Ethernet Adapter Poe Injector

Min.Order: 100
Product origin: Dongguan, Guangdong, China
Infringement complaint: complaintComplaint
US$ 6 ~ 8

Description
 
Description:

It is a single port, wide-temperature, high power PoE Injector, output 48VDC, 120W for remote PDs over full 4 paris, transmission rate 10/100/1000Mbps. LNK-PSE1201G provides power for IEEE802.3af/at/bt, PoH standard terminal devices, such as high power stations, outdoor wireless AP, outdoor IP cameras. LNK-PSE1201G is designed for working temperature during -10 to 40ºC, with the input voltage 100-240VAC. A detection chip inside, it will do detection PDs before power. The better work distance is 100m, it special suitable for complex power situations.

 

Product parameters of 120W Wall Mount over Ethernet Adapter POE Injector:
 
OutputSafe typeGRT-POE60-XXXYYYAGRT-POE60-XXXYYYAGRT-POE60-XXXYYYA-BT 
Voltage range 48~56VDC48~56VDC48~56VDC 
Maximum power75W90W90W  
 speedGbps  GbpsGbps 
IEEE802.3Non-standard, no active detectionNon-standard, no active detectionStandard, active detection of 802.3BT 
Voltage accuracy±5.0%±5.0%±5.0%±3.0%
Linear adjustment rate±1.0%±1.0%±1.0%±1.0%
Load adjustment rate±5.0%±3.0%±3.0%±2.0%
Start, rise, hold time2000ms, 50ms, 10ms /230VAC
3000ms, 50ms, 10ms /115VAC (At full load)
InputVoltage range 90 ~ 264VAC
Frequency range47 ~ 63Hz
efficiency87%87%87%87%
Alternating current0.8A / 115VAC    0.4A / 230VAC
Inrush current max.Cold start 40A / 115VAC    75A / 230VAC
Leakage current max.0.25mA / 240VAC
ProtectExcess load120%~180% of rated output power
Protection mode: burp mode, automatically recovered after load anomalies are removed
overvoltage110%~140% of the rated output voltage
Turn off the output voltage and restart to restore
EnvironmentOperating temperature-10 ~ +50ºC (Please refer to "Decrement curve")
operating humidity20 ~ 90% RH, non-condensing
Store temperature and humidity-20 ~ +85ºC, 10 ~ 95% RH, non-condensing
Temperature coefficient±0.03% /ºC (0 ~ 40ºC)
Vibration resistance10 ~ 500Hz, 2G 10 minutes/cycle, X, Y, Z axis 60 minutes each
Safety and electromagnetic compatibilitySafety specificationpassed GB4943 , GB4706, IEC61558,EN61000-3
Withstand voltageI/P-O/P: 3000VAC
Insulation impedanceI/P-O/P:10M Ohms / 500VDC / 25ºC/ 70% RH
Electromagnetic compatibility generator shootParameterStandardTest Level / Note
Conducted emissionGB17625.1,EN55032Class B
Radiated emissionGB/T-9254, EN55024, GB4343, FCC Part 15Class B
Othersquality guanrantee period2 years
MTBF≥45000 hours

Features of 120W Wall Mount over Ethernet Adapter POE Injector:
 
  1. Up to 120W of PoE Power over 4-pairs.
  2. PoH (802.3bt), IEEE802.3at and 802.3af compliant.
  3. Supports 10/100/1000M LAN environment.
  4. Power over Ethernet (PoE) Injector delivers a PoE signal for distances of up to 100 meters (328 ft.) 
  5. Plug & Play installation.
  6. Data and power passed by the Ethernet cable.
  7. Full protection: overload/overcurrent/over-voltage/short circuit.
  8. 100% full burn-in testing, strictly inspect and control during production.

Application of 120W Wall Mount over Ethernet Adapter POE Injector:

IP phone, VoIP phone, wireless networks access points, IP print servers, Bluetooth access points, security cameras, the smart door system.
Detailed Photos

 

Product Tag:
Related categories:
Scroll to Top